Here's an odd question: Which tables are affected by the injector size parameter? I assume the VE table uses this parameter, but do other tables use...
I'm going to be redoing my downpipe in 3" (it's currently 2.5") and making a few other changes, and as a result I will need to relocate my F.A.S.T....
I've been trying to find some decent info on acceptable EGT temps and probe placement, and I can't seem to get a straight answer. Maybe someone here...
As I mentioned in my previous posts, I need to make some adjustments to my existing FAST B2B/WBO2 configuration, and would welcome some input. The...
After taking a few years off to devote time to our young son and to rebuild my motor yet again, I finally have my turbocharged Toyota truck back on...
I was wondering what sort of output signal the nitrous outputs produce? I have a B2B/WBO2 FAST setup and am toying with the idea of water injection,...
Well, after almost a month of happy motoring, it looks like I'll be pulling my motor to re-ring it. :( I think I have a grasp of what went wrong and...
I think I know the FAST software pretty well, but I'm at a point where I would like to work with someone who really knows how to tune, preferrably...
If possible, I'd like to verify whether my SpeedPro unit's ignition output signal rising edge or falling edge. I have what I believe is the...
Had my truck on the dyno for the first time last week, and it was an interesting experience, one that has given me a few things to sort out. One...
Something that I've been wondering about for a while: I have a SpeedPro managing my four cylinder turbo Toyota. The wiring harness that Force EFI...
OK, here's a variation of the old "how do I establish base timing and proper crank reference angle" question. I have the SP installed on my...
I have a weird problem with my laptop (an older Compaq Armada 7750MT) and the SpeedPro ECU, and I'm hoping that maybe someone else can shed a little...
Lance, Craig, or anyone, File this as a future feature request, but it would be great if there was some way to adjust the sensitivity of the knock...
Has anyone used a J&S SafeGuard (or their new Ultra SafeGuard) with a SpeedPro/FAST EMS? http://www.safeguard.20m.com/index.html For those...
Separate names with a comma.
