|
 |
 |
 |
 |
 |
 |
 |
|
|||||||
|
Welcome to the TurboBuick.Com forums. You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features. By joining our free community you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is fast, simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact contact us. |
 |
|
|
LinkBack | Thread Tools | Display Modes |
April 4th, 2007, 06:15 AM
|
||||
|
||||
|
Harness install questions
How is everyone mounting the SIDE harness straps to the floor(bolt in type). I got a bracket fabed up for the submarine belt. I just need some info on the side belts.
Thanks! Ray
__________________
86 GN- John Craig TE45A, .030 over, JE forged pistons, VPE Racing Fully Ported Iron heads & intake, Speed Pro 204/214 Cam, Keith Mease 3"DP w/ dump, 55 lb. injectors, 3" LT1 MAF w/Translator, Thunder Fabrications 20 row intercooler, JG Transmission's 2004r street/strip trans, PTS Extreme shift kit, PTS pump, PTS deep pan, & PTS internals, Vigilante 9.5 in. 3500 stall converter, hotwired Walbro 340 FP, ATR 3" Single Shot Exhaust Bought and paid for with Union negotiated wages!! 
    
|
|
April 4th, 2007, 07:51 AM
|
|||
|
|||
|
I put mine on the same bolts as the regular seat belts. I think I needed a T-50 torx bit for the bolt.
__________________
Royal Foster Littleton, CO. Orig owner '86GN. TE-44, THDP, MSD 50's, Thunder Fab I/C 11.47 @ 117.7 At 5800'
|
|
April 4th, 2007, 04:02 PM
|
||||
|
||||
Thanks Guys!!
__________________
86 GN- John Craig TE45A, .030 over, JE forged pistons, VPE Racing Fully Ported Iron heads & intake, Speed Pro 204/214 Cam, Keith Mease 3"DP w/ dump, 55 lb. injectors, 3" LT1 MAF w/Translator, Thunder Fabrications 20 row intercooler, JG Transmission's 2004r street/strip trans, PTS Extreme shift kit, PTS pump, PTS deep pan, & PTS internals, Vigilante 9.5 in. 3500 stall converter, hotwired Walbro 340 FP, ATR 3" Single Shot Exhaust Bought and paid for with Union negotiated wages!!
|
|
April 4th, 2007, 06:48 PM
|
|||
|
|||
|
stock belt holes ,
i left the stock belts there as well , wouldnt want you to get a ticket for driving with no seat belt
__________________
paul...magnabuick.com NJ rep 86gn bone stock shortblock , ported irons ,LT GT71Q 75#inj , V2 , atr 3" HKS ,200-4r, stageright , AC9"NL , TTWB 6.0 alkycontroll dual nozzle ,msbc-1 ,LC-1 1.42 6.57 104.9 10.4 129.8 now trying out lonnie diers th400 w/tbrake 87GN ,prev combo unopened motor TA49, duttneck 50# , dynotech hipro, protorque 10.5", alkycontrol, TT ..11.45 117 1.57 fresh motor .. stock turbo 55# ,TT WB 6.0,msbc-1 ,LC-1 ,cottons 3" Tail,turbosaver all runs on quick chek 93 octane alkycontrol.com progressive meth injection turbotweak.com
|
|
April 5th, 2007, 07:38 AM
|
||||
|
||||
|
Quote:
__________________
86 GN- John Craig TE45A, .030 over, JE forged pistons, VPE Racing Fully Ported Iron heads & intake, Speed Pro 204/214 Cam, Keith Mease 3"DP w/ dump, 55 lb. injectors, 3" LT1 MAF w/Translator, Thunder Fabrications 20 row intercooler, JG Transmission's 2004r street/strip trans, PTS Extreme shift kit, PTS pump, PTS deep pan, & PTS internals, Vigilante 9.5 in. 3500 stall converter, hotwired Walbro 340 FP, ATR 3" Single Shot Exhaust Bought and paid for with Union negotiated wages!!
|
|
April 5th, 2007, 01:31 PM
|
||||
|
||||
|
I used the stock locations on the lap belts.
On the sub belt, I welded a 1/2" nut to a piece of 2.5" x 6"x 1/8" thick flat stock. Using a 1" holesaw, I cut a hole in the cross car brace that runs under the seat. I welded the flat stock to the brace with the nut inside the hole. Nice and strong.....not likely to fail
__________________
1985 GN 9.85@138 270 Stage 2
|
|
April 5th, 2007, 01:35 PM
|
|||
|
|||
|
just dont attach to the crossmember
__________________
paul...magnabuick.com NJ rep 86gn bone stock shortblock , ported irons ,LT GT71Q 75#inj , V2 , atr 3" HKS ,200-4r, stageright , AC9"NL , TTWB 6.0 alkycontroll dual nozzle ,msbc-1 ,LC-1 1.42 6.57 104.9 10.4 129.8 now trying out lonnie diers th400 w/tbrake 87GN ,prev combo unopened motor TA49, duttneck 50# , dynotech hipro, protorque 10.5", alkycontrol, TT ..11.45 117 1.57 fresh motor .. stock turbo 55# ,TT WB 6.0,msbc-1 ,LC-1 ,cottons 3" Tail,turbosaver all runs on quick chek 93 octane alkycontrol.com progressive meth injection turbotweak.com
|
|
| Thread Tools | |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Is this safe and legal? (Harness install) | KevinB | Safety Equipment | 6 | March 30th, 2007 08:08 PM |
| Boost sensing harness install? | Squid4life | General Turbo Buick Tech | 3 | January 15th, 2006 09:42 PM |
| field fix harness and reds volt booster install?? | 1985GN | General Turbo Buick Tech | 6 | November 6th, 2003 10:42 PM |
| Harness and seatbelt questions | Falcon351C | Turbo Lounge | 1 | February 24th, 2003 09:44 AM |
| How much time does it take to install a wiring harness | GnTooFast4u | Hot Air (non-intercooled) Tech | 3 | February 11th, 2003 11:47 PM |
Linear Mode
