Squid4life

Hey, thanks for the tapes:D

How's it going Squid? Just checking with you to see if the 4x6's are on their way to your humble abode. Later.

how did you wire up your dual intrepid fans. I can get a new set off ebay fairly cheap but was no sure how to wore them up to the stock harness.

I can use that front cover it, it will work on a stage II block correct?

do you still have it?

check with Jeff Rand, he has a guy in Lake Elsinore, that is GOOD and reasonable.
he has been doing T400 trans for 20+yrs, and he's local!

make me an offer

Mine goes to the pan, but you could accomplish the same thing going to the stock location with the right adapters. If I remember correctly, the fitting on the block is 1/2" NPT. What I would do is use an adapter from 1/2" NPT to -10 AN into the block, then use standard straight -10 AN fittings with a short hose between them.

Summit SUM-220047 - Summit® AN to NPT Adapter Fittings - Overview - SummitRacing.com
Summit SUM-220090 - Summit Racing® Hose Ends - Overview - SummitRacing.com
Summit SUM-230003 - Summit® Stainless Steel Hose - Overview - SummitRacing.com

Hope this helps!

Hello mind if i ask you how you did your drain back for your turbo using the adapter you posted from ebay i got one but now i need some help or ideas i'm going back to stock location on the block instead of the oil pan thanks.

Al