GNX ,Prototypes,Parts,Build Info, EXC

[MENTL231]

Rick.. Do You Have Any Pictures Or Are There Templates Of What You Used To Cut Out On The Cars When You Installed The Flares.. I Was Looking Under The Wheel Well Of My Friends Gnx And Was Trying To Figure Out How Much And What Had To Be Cut. My Intention Is To Make My Aftermarket Flares Functional.. They Look Silly With The Wrong Offset Wheels. Thanks, Jay.

[X Ray]

Originally Posted by MENTL231

Rick.. Do You Have Any Pictures Or Are There Templates Of What You Used To Cut Out On The Cars When You Installed The Flares.. I Was Looking Under The Wheel Well Of My Friends Gnx And Was Trying To Figure Out How Much And What Had To Be Cut. My Intention Is To Make My Aftermarket Flares Functional.. They Look Silly With The Wrong Offset Wheels. Thanks, Jay.

Jay,
I can give you the process that was used when I reworked the prototype vehicles; it works better then the templates. My question to you is this, are you going to make a new inner wheel well like the one shown earlier in this thread??? If you do not it is likely that the tire will hit !!!! Second there are three components that were used for clearance to the front tires. First the new wheel well inner (that we just talked about), second was a spacer to push the stock plastic wheel well liner forward (an easy bracket to make). Third a new plastic rear wheel well liner to prevent you from rubbing in that area (not easy to make). You can see this on your friend’s car.
All this was done to prevent any interference in the wheel well area with the new wheel offset and tire size changes, required for all potential driving conditions. You can probably get away from doing some of this and not have any problems driving but I would not recommend it because I have not built a vehicle without all the revisions just mentioned.
If you decide you want the instructions for reworking the fenders I will try and post it this weekend if at all possible. Regards

[MENTL231]

Originally Posted by X Ray

Jay,
I can give you the process that was used when I reworked the prototype vehicles; it works better then the templates. My question to you is this, are you going to make a new inner wheel well like the one shown earlier in this thread??? If you do not it is likely that the tire will hit !!!! Second there are three components that were used for clearance to the front tires. First the new wheel well inner (that we just talked about), second was a spacer to push the stock plastic wheel well liner forward (an easy bracket to make). Third a new plastic rear wheel well liner to prevent you from rubbing in that area (not easy to make). You can see this on your friend’s car.
All this was done to prevent any interference in the wheel well area with the new wheel offset and tire size changes, required for all potential driving conditions. You can probably get away from doing some of this and not have any problems driving but I would not recommend it because I have not built a vehicle without all the revisions just mentioned.
If you decide you want the instructions for reworking the fenders I will try and post it this weekend if at all possible. Regards

I WILL BE TRYING TO MAKE THE WHEEL WELL FOR THE FRONT. AND AS MUCH AS I DON'T WANT TO I WILL BE MOST LIKELY CUTTING MY REAR WHEEL WELLS TO FIT THE WHEELS WITH THE INCREASED OFFSET. THE TEMPLATES OR MEASUREMENTS WOULD BE HELPFULL. AS FAR AS THE REAR BESIDES THE REAR QUARTER ITSELF WHERE ELSE DOES IT REQUIRE MAKING ROOM. ON MY FRIENDS GNX, IT APPEARS THAT THE QUARTER WAS CUT, THEN RIVITED TO THE INNER WHEEL HOUSE AND LITTLE L BRACKETS WERE MADE TO HOLD THE FLARE. ANY MORE INFO I'M MISSING WILL BE HELPFULL. AS FAR AS THE WHEELS GO I'M WAITING TO SEE THE RESULTS FROM A COMPANY MAKING THE CORRECT OFFSET WHEELS OUT OF A SET OF GTA'S AND I MAY GO WITH THAT COMPANY. ONLY BECAUSE A REAL SET OF GNX WHEELS IS NEAR IMPOSSIBLE TO FIND!! UNLESS YOU HAVE A SECRET STASH!!! ANY HELP IS APPRECIATED!! THANKS, JAY!

[86gngirl]

Here is a picture from the GNX book. I found this posted on another site. Hope it helps.

[X Ray]

I will come up with a plan to get you, and everyone that wants the information, how to best rework your vehicle. It will take me a little time to come up with a good format for this information. I have chicken scratch notes that only I can decipher that need to be cleaned up. Heck I may even use my car for illustrated pictures. As for the wheels I wish I had a secret stash but no luck.

[MENTL231]

Originally Posted by X Ray

I will come up with a plan to get you, and everyone that wants the information, how to best rework your vehicle. It will take me a little time to come up with a good format for this information. I have chicken scratch notes that only I can decipher that need to be cleaned up. Heck I may even use my car for illustrated pictures. As for the wheels I wish I had a secret stash but no luck.

THANKS RICK. I APPRECIATE IT. I HAVE AN IN ON ANOTHER SET OF WHEELS THAT ARE CLEAN. AND DON'T HAVE THE DIMPLES LIKE THE OTHER GTA WHEELS. I WILL BE PICKING THOSE UP THIS WEEKEND AND I WILL MOST LIKELY BE SENDING THOSE OUT SOON. THEN OUT COMES THE CUTTING TOOLS TO OPEN UP THE FENDERS. I FEEL BAD BUT IF ASC CAN DO IT I CAN!! I JUST NEED TO WELD SOME SHEET METAL OVER THE TEE TOPS NEXT!! HERES A PIC OF WHAT I'M WORKING WITH.

[X Ray]

Your car looks good…..
This is the first installment for reworking your vehicle…

[GNRick]

Rick- you really need to give a seminar and bring your buick related souvenirs out so the public can see them. If you can make it to Bowling Green some year I'm sure they would be happy to have you give a speech under the tent or in a hotel banquet room. Thanks for sharing.

[X Ray]

Thanks for the nice comments …I will consider doing that if I get time to go back to Bowling Green…... P.S I think I would be qualified to help judge the GNX Concourse class . Regards

[GNRick]

Kirban is also hosting a banquet in Sept. at a country club by his house. He said Molly will be attending, among others. Just a thought.

[X Ray]

This is the second installment for reworking your vehicle…..

[turbo87regal]

Thanks for all the great info Rick. Please keep it coming

[86gngirl]

Originally Posted by GNRick

Kirban is also hosting a banquet in Sept. at a country club by his house. He said Molly will be attending, among others. Just a thought.

Do you have any more info on this, dates, times, address of where it is? Thanks.

[GNRick]

Originally Posted by 86gngirl

Do you have any more info on this, dates, times, address of where it is? Thanks.

Just go to his website, Welcome to Kirban Performance Products sign up for his inner circle emails and then you will be "in the know". you can also email him for more info.

Rick

[86gngirl]

Originally Posted by GNRick

Just go to his website, Welcome to Kirban Performance Products sign up for his inner circle emails and then you will be "in the know". you can also email him for more info.

Rick

Thank you.

[MENTL231]

Originally Posted by X Ray

This is the second installment for reworking your vehicle…..

YOU ARE THE BEST!!!!!

[8TurboT7]

Hey Rick got any picture of the X-Ray to Share?

[X Ray]

Please is the X Ray Thread...I will be adding addioional pictures when I get back for the Norwalk trip....thanks

[tb3]

Hi X-ray. I know little about all the actual tech of the GNX's. But to my knowle