|
 |
 |
 |
 |
 |
 |
 |
|
|||||||
|
Welcome to the TurboBuick.Com forums. You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features. By joining our free community you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is fast, simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact contact us. |
 |
|
|
LinkBack | Thread Tools | Display Modes |
November 17th, 2002, 04:19 PM
|
|||
|
|||
|
At 60 mph is where the 2000 rpm drone comes on with the stock gears and stock tranny.
So I would guess maybe 2200 - 2400 rpm.     
|
|
November 17th, 2002, 10:20 PM
|
|||
|
|||
|
If your car is all stock, meaning converter, rear end and so on you should be turning about 2100 to 2200 rpms.
This is with the converter locked up. Figure 200 rpms higher with a non lock converter. These are ballpark figures from memory and a bar graph for a tach.
|
|
November 17th, 2002, 11:43 PM
|
|||
|
|||
|
RPM at 70
I'm at exactly 2100 at 70MPH.
Dale
__________________
85T new top, KB headers, 2 1/2 exhuast, type II coils, adj reg, hot wired walbro 340, 40lb injectors, electric fans, 87 GTA hollow sway bar, CAS Dash kit,87 ECM with caspers 8 pos chip,3 in MAF with translator, more to come.
|
|
November 17th, 2002, 11:50 PM
|
|||
|
|||
|
Thanks for the replies guys........At 70 I'm turning around 3200 RPM........The guy I bought my car from said it has 4:10 to 1 gears.....and it is pretty peppy off the line (with no boost) so I guess he wasn't lying to me........
Woody
|
|
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
