Digital LED Tailights for the TR

[Brian Verson]

still no comp # . Has mine shipped yet . If not I would like to cancel my order and get my money back. I'll purchase them once you get the bugs worked out.

Thanks Brian Verson (618) 973-0297

[Victory]

Anyone in the first batch get these to work? I must admit I'm getting a little nervous...

[Tooch36]

I wouldn't get too nervous with your purchase. The kit is very well made and with anything that is new there is sure to be a few bugs that need to be worked out.

I don't know Scot and have never met him so I'm not trying to sell the kits to you or to get you to keep your order. I ordered a kit and so far it looks like I'm the first one to try the install. I'm 90 percent done. Just waiting on a no load flasher that will be here tomorrow and I will be done. I'll post my install experience with what I did to try and help you guys thru it. I'm very particular with my car and have gone slow to make sure everything is very clean and done right. I've kept everything intact so that it can be returned to stock if needed.

I've hit a few gliches when I started and felt very nervous about the purchase but after posting on here a couple of times and dealing with Scot online, you can be confident that you made a good buy. He is very attentive to your questions and answers very fast and honestly. Keep in mind that he is a turbo guy just like us and came up with this product cuz it was something he wanted and offered to us. The lights look unbelievable!! The cascade effect is worth the effort to get them installed. Once a few of us do it then it will be that much easier for the rest of us.

Just my 2 cents for what its worth.

[49-blues]

im installing one of my sets next week- so far i like what i see.

[RUQWKNF27]

Well Hell if I ever get my kit I might find this out!

I could have already paddled to China and had a 12 yr old make it for me!
Scot you know im just kidding. I know a nice White T with your name on it when you get ready

[eddieoWE4]

Ttt

[Tooch36]

Ok, here is where I am at now with the No-Load flasher from spaghetti.

All the functions WITHOUT the runnings lights on work properly but the blink rate is faster than stock and also the video on injectionX.

When the running the lights are turned ON and the blinker is applied the outside board blinks. It goes bright and cascades off with dim running light staying on while the cascade effect cycles. That is proper.

It is the inside the board that doesn't seem right. Once the blinker is on with the running lights on the inside board goes into a regular blink from bright to dim while the outside board is cascading. If you apply the brake the inside board goes steady. On the video on injectionX they do not show what it should do with the running lights on and blinker applied.

Is that the correct function? I just wasn't expecting the inside board to blink at all. It seems that the operation (blinker wise) should be the same with or without the running lights on.

Scot, I know you're in BG so get back to me when you get a chance.

[scot w.]

Originally Posted by Tooch36

Ok, here is where I am at now with the No-Load flasher from spaghetti.

All the functions WITHOUT the runnings lights on work properly but the blink rate is faster than stock and also the video on injectionX.

When the running the lights are turned ON and the blinker is applied the outside board blinks. It goes bright and cascades off with dim running light staying on while the cascade effect cycles. That is proper.

It is the inside the board that doesn't seem right. Once the blinker is on with the running lights on the inside board goes into a regular blink from bright to dim while the outside board is cascading. If you apply the brake the inside board goes steady. On the video on injectionX they do not show what it should do with the running lights on and blinker applied.

Is that the correct function? I just wasn't expecting the inside board to blink at all. It seems that the operation (blinker wise) should be the same with or without the running lights on.

Scot, I know you're in BG so get back to me when you get a chance.

Remember the video on The site, That "was for an example only!" It had to be done manually because of one light being the stock light and the other being the LED!! So, yes! it will be faster than the video!

Ok I'm on the computer in the lobby of a motel right now. The inside board when the running lights are on, shoud go OUT while the turnsignal is ON!!

I was informed from spahgetti that the inside board should stay illuminated as a brake light when on the brakes and while the turn signal is on.


I will be home monday morning and I will be calling them with this issue and I will get back with you asap.

Scot W.

[scot w.]

Everyone!! As we realized, it's looking like most of our buicks will need the No-Load flashers! So, I will be including the no-load flashers with the kits from this point on for serveral reasons,

One, to eliminate the customer having to purchase them!

Two, to make it easyier on everyone purchasing the kit wich will also elliminate extra cost of shipping.

The cost of the flasher will reflect in the new price.

Scot W.

[49-blues]

wherelse can we buy the no load flashers in a hurry-i want to complete my installation this thursday and dont want any delays? pep boys? anything special about these except for the ground wire?

[scot w.]

Originally Posted by Brian Verson

still no comp # . Has mine shipped yet . If not I would like to cancel my order and get my money back. I'll purchase them once you get the bugs worked out.

Thanks Brian Verson (618) 973-0297

Yes brian, Yours are already on there way bud!

I'll PM you your tracking #

If your still wanting a refund let me know becuse yours will be spoken for already!

Scot W.

[scot w.]

Originally Posted by 49-blues

wherelse can we buy the no load flashers in a hurry-i want to complete my installation this thursday and dont want any delays? pep boys? anything special about these except for the ground wire?

You should be able to get them at any auto parts store. Also read the instructions real close concerning the flashers. It says to replace the BI-METAL flasher with either a STANDARD flasher or a NO-LOAD flasher. It is very important to have a good ground off the flasher. The standard flashers might work just fine. (Tooch) usded a Heavy Duty flasher and it says in the instructions that the LED's will not work with the Heavy Duty ones. So make sure it's not the Heavy Duty flasher!!!!

I'm home now from BG (only about 1 hour) so I need to un-pack and un-wind from another great time at the GS Nationals..

Scot W.

[Tooch36]

I was unable to find a no load flasher at any of the out parts stores near me in MA. AutoZone, Napa, Advance Auto parts. They all carry a variable load but you need the no-load. You can tell the difference because the no-load has a ground wire coming from it.

You'll see a very easy location for the ground wire on the metal wire harness when you remove the AC-heater blower vent under the steering wheel.

The flasher is just to the right of the steering column.

Scot, I'll get that video to you tomorrow of my lights in action.

[scot w.]

Originally Posted by Tooch36

I was unable to find a no load flasher at any of the out parts stores near me in MA. AutoZone, Napa, Advance Auto parts. They all carry a variable load but you need the no-load. You can tell the difference because the no-load has a ground wire coming from it.

You'll see a very easy location for the ground wire on the metal wire harness when you remove the AC-heater blower vent under the steering wheel.

The flasher is just to the right of the steering column.

Scot, I'll get that video to you tomorrow of my lights in action.

Thank you!

[V8Assassin]

Thanks for the lights Scot. I will be installing them this week and I can assure everyone they are as impressive in person as they are in the pictures. Lucky to have guys like this developing upgrades for our cars! Scot is a great guy who takes an enormous amount of pride in how his vehicles appear and would not put his name on anything less than perfection.

[scot w.]

Everyones LED lights have been sent out last week while I was in BG. My e-mail has been rejecting them for some reason. They keep coming back to me So if you would like a copy of your tracking #, Please PM me your full name and I will add it to your PM. Sorry for the wait.

Scot W.

[Royal-T-Ltd]

i finally had time to finish the install yesterday... i took my time - soldered everything, used weather pack connectors so i could easily remove or work on things... fit and finish are great... but i cant drive b/c they arent working properly ..... yet - i ordered the "variable/no load flasher" on the 13th - called em today to see whats up - i think they forgot to send em - b/c the tracking number they gave me said it was shipped today - Well at least my wiring looks good ... cant tell you how the cascading looks yet

regardless - I applaud Scott for taking the initiative and time to get this thing together ----- hell he doesnt even have a buick anymore

thanks again - i cant wait to get everything working.

[scot w.]

Originally Posted by Royal-T-Ltd

i finally had time to finish the install yesterday... i took my time - soldered everything, used weather pack connectors so i could easily remove or work on things... fit and finish are great... but i cant drive b/c they arent working properly ..... yet - i ordered the "variable/no load flasher" on the 13th - called em today to see whats up - i think they forgot to send em - b/c the tracking number they gave me said it was shipped today - Well at least my wiring looks good ... cant tell you how the cascading looks yet

regardless - I applaud Scott for taking the initiative and time to get this thing together ----- hell he doesnt even have a buick anymore

thanks again - i cant wait to get everything working.

Go ahead and rub it in!!

I sent you a PM..

Scot W.