|
 |
 |
 |
 |
 |
 |
 |
|
|||||||
|
Welcome to the TurboBuick.Com forums. You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features. By joining our free community you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is fast, simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact contact us. |
 |
|
|
LinkBack (2) | Thread Tools | Display Modes |
March 3rd, 2008, 02:32 PM
|
|||
|
|||
|
This is my first post. Hopefully we're down to 6 or less cause I'm in - just ordered mine!
__________________
87 T Type Limited Loaded,lowered,17x8TTIIs,cold air intake,Reds chip,Lt1 mass air,Reds pump,3in flowmaster duals(sounds awsome) 
    
|
|
March 3rd, 2008, 02:54 PM
|
||||
|
||||
Thanks guy's!
 Were at 7 more needed! ( some didn't order yet!) But that is the minimum. We can deffinetly order more it don't have to end at the 25.(TurboDave) and I just got done taking the video today of the lights in motion and it has been sent to Nelson Febus to compress and upload so as soon as that's done we will get it posted on the main page of this thread!! LOOKS GREAT!! Thank you to all that have ordered your kits and i'm doing my best to get these going as fast as I can! Trust me, I want to be able to bring a bunch to BG this year.. I spoke to the manufacture today and 90% of the company is out of town at a show so I was unable to get a deffinate answer as to when these will begin to ship out. I DO KNOW once they recive the prototypes back it will take like 3-4 weeks to turn the prototype set into production sets so please bear with me as I try and get these done. Thank you! Scot W.
__________________
Digital LED Tail lights  1986 T-Type GNXRay (X-ray clone) White W/black out trim, Grey leather int., LED taillights from InjectionX, H&R engine Mounts, 55lb injectors, G-body parts S.L.I.C, 9.5" (Dusty Bradford) PTC N/LU conv, Trans re-worked by Todd Lyle, Walbro 340, Hot wire kit, RJC powerplate, 3" TH down pipe, ATR 3" Stainless Steel dual exhaust, 4-Adjustable drag shocks, Southside uppers & lowers, Carrilo rods, JE forged pistons, Driveshaft loop, powdercoated & polished GTA rims.. 1986 GN - 6.76 @ 103.8 1/8th - SOLD 1987 WE4 - SOLD
|
|
March 3rd, 2008, 03:22 PM
|
||||
|
||||
|
I'm hoping that Nelson can do something with the video I send him.
It's hard to tell by looking at the results on my camera. We took them in the garage, and to be honest the LED light was so bright is washed things out and look kinda orange. I'm not a pro photog by any means. I can tell you be watching them operate with the naked eye, it's an enormous difference, MUCH better than what shows on film!!! I sorta expected it though, I put some LED tail lights on my car hauler not so long ago and they only had like 6 elements each and made s significant difference. These lights with the massive amount of elements are SUPERMAN bright.
__________________
TurboDave EWCS(SW) USN Ret Email Us Sevierville, TN TranslatorPro MAFless fuel, spark and boost management 86 GN(TranslatorPro/ExtenderPro on speed density w/boost & fuel pump control,PLX-WB) (original owner) 87 GN (second owner) 84 L69 Z28 (original owner) 01 Excursion LTD 7.3L PSD(Power Stroke Diesel), Turbo, 4X2 08 Honda Accord EX-L, 3.5V6, AT My Photo Gallery
|
|
March 3rd, 2008, 07:22 PM
|
||||
|
||||
|
Video! Video! Video!!!
HERE IS A SHORT VIDEO OF THE TAILIGHTS IN ACTION! KEEP IN MIND IF FOR SOME REASON YOU DON'T LIKE THE SEQUENTIAL MOVMENT IT CAN BE TURNED OFF!!
VIEW VIDEO HERE: http://www.injectionx.com/lightpage.html YOU CAN ALSO PURCHASE THEM ON THAT SAME PAGE! Scot W.
__________________
Digital LED Tail lights 1986 T-Type GNXRay (X-ray clone) White W/black out trim, Grey leather int., LED taillights from InjectionX, H&R engine Mounts, 55lb injectors, G-body parts S.L.I.C, 9.5" (Dusty Bradford) PTC N/LU conv, Trans re-worked by Todd Lyle, Walbro 340, Hot wire kit, RJC powerplate, 3" TH down pipe, ATR 3" Stainless Steel dual exhaust, 4-Adjustable drag shocks, Southside uppers & lowers, Carrilo rods, JE forged pistons, Driveshaft loop, powdercoated & polished GTA rims.. 1986 GN - 6.76 @ 103.8 1/8th - SOLD 1987 WE4 - SOLD
|
|
March 3rd, 2008, 07:53 PM
|
||||
|
||||
|
very nice looking lights, just the price $259, wow. that could buy alot of LED lights for the whole car.
Hands down those look better than the LED bulbs I installed in my car, (for the price comparrison they should) I understand that your just getting the ball rolling on these so that is to be expected. Good luck w/ your sales, people will buy them, give it a little time, I assume that in the next couple years somthing for the parking lights would be in the works??? ohh, people will always want more pics.  I started a thread about LED bulbs, posted which bulbs to order, a bunch of pics, and I got flooded w/ a ton of questions. kind of overwhelming, but thats what this board is for, the information on here is priceless.......
__________________
Jason Yedica -Specialize in Auto Body and Painting- -83 Regal Limited (4185 PPG White)- 350 HO crate Engine, 330hp, 390 ft/lbs, PTS 200R4 Killer street Transmission. Torque Tech 3" X-pipe to 2.5" dual exhaust, Flowmaster Mufflers. Grand National Hood-Grand National Interior (all of it),3.42 gears, 15x7 TTII chrome wheels, Michelin 215/60 in front, BFG 255/60/15 in back Completely restored -1999 Chevy Tahoe Z71 2 door Lowered 3" from stock, 17" wheels, wide tires, Cowl Hood, Flowmaster exhaust, dual 4" tips, hypertech, 350 cubic inch's of power
|
|
March 3rd, 2008, 08:27 PM
|
||||
|
||||
|
NOW I AM EXTREMELY ANXIOUS. That looks awesome.
__________________
Best run 11.621 at 121MPH 86 T Top GN, TA49, 60's, Champion ported iron heads, Champion ported stock intake, Vigilante 3200 5 disc "O" pump lock up converter. Brian Hofer trans. T&D roller rocker and Comp roller cam Alky Control. http://community.webshots.com/user/jpratt725 http://www.fquick.com/8uwav6
|
|
March 3rd, 2008, 08:32 PM
|
||||
|
||||
|
Quote:
That extra $150 buys: * Limited Lifetime Warranty.(If a LED bulb was to burn out it's replaced at no charge). * 80 High Intensity Wide Angle LED's per side. (total of 160 LED's) * The option to have them in Sequential movement or not. * Fills up the whole lens for a more modern look. Thanks for the compliments and I hope you do good as well. Scot W.
__________________
Digital LED Tail lights 1986 T-Type GNXRay (X-ray clone) White W/black out trim, Grey leather int., LED taillights from InjectionX, H&R engine Mounts, 55lb injectors, G-body parts S.L.I.C, 9.5" (Dusty Bradford) PTC N/LU conv, Trans re-worked by Todd Lyle, Walbro 340, Hot wire kit, RJC powerplate, 3" TH down pipe, ATR 3" Stainless Steel dual exhaust, 4-Adjustable drag shocks, Southside uppers & lowers, Carrilo rods, JE forged pistons, Driveshaft loop, powdercoated & polished GTA rims.. 1986 GN - 6.76 @ 103.8 1/8th - SOLD 1987 WE4 - SOLD
|
|
March 4th, 2008, 09:20 PM
|
||||
|
||||
|
The installed pictures and the video sold me, I am ordering a set. Any idea when we will be receiving them? Keep up the good work.
__________________
87 WE-4 Anderson Performance forged stroker, GN1R race ported aluminums, GN1 port matched intake, custom grind comp cams roller cam, T&D roller rockers, 76gtq ball bearing, Aeromotive fuel system, FAST, Razor's alky, RJC intercooler, Janis built 200r4, precision 3500stall, Baer Brakes all the way around, blah blah blah.....
|
|
March 4th, 2008, 09:29 PM
|
||||
|
||||
|
Can't get the paypal part of your website to work. Can you give me your email so I can send the paypal?
__________________
87 WE-4 Anderson Performance forged stroker, GN1R race ported aluminums, GN1 port matched intake, custom grind comp cams roller cam, T&D roller rockers, 76gtq ball bearing, Aeromotive fuel system, FAST, Razor's alky, RJC intercooler, Janis built 200r4, precision 3500stall, Baer Brakes all the way around, blah blah blah.....
|
|
March 4th, 2008, 09:55 PM
|
||||
|
||||
|
Quote:
I'm still working on the instructions right now then I send the prototype & instructions back to the manufacture then they go into production. At that point we just have to wait for them to get the order done. I was told about 4wks. They are swamped with orders right now but they will get our order done ASAP. THANKS! Scot W.
__________________
Digital LED Tail lights 1986 T-Type GNXRay (X-ray clone) White W/black out trim, Grey leather int., LED taillights from InjectionX, H&R engine Mounts, 55lb injectors, G-body parts S.L.I.C, 9.5" (Dusty Bradford) PTC N/LU conv, Trans re-worked by Todd Lyle, Walbro 340, Hot wire kit, RJC powerplate, 3" TH down pipe, ATR 3" Stainless Steel dual exhaust, 4-Adjustable drag shocks, Southside uppers & lowers, Carrilo rods, JE forged pistons, Driveshaft loop, powdercoated & polished GTA rims.. 1986 GN - 6.76 @ 103.8 1/8th - SOLD 1987 WE4 - SOLD
|
|
March 5th, 2008, 08:26 AM
|
||||
|
||||
|
Sounds great, payment sent.
__________________
87 WE-4 Anderson Performance forged stroker, GN1R race ported aluminums, GN1 port matched intake, custom grind comp cams roller cam, T&D roller rockers, 76gtq ball bearing, Aeromotive fuel system, FAST, Razor's alky, RJC intercooler, Janis built 200r4, precision 3500stall, Baer Brakes all the way around, blah blah blah.....
|
|
March 5th, 2008, 09:13 AM
|
||||
|
||||
|
Payment recived!
Quote:
Scot W.
__________________
Digital LED Tail lights 1986 T-Type GNXRay (X-ray clone) White W/black out trim, Grey leather int., LED taillights from InjectionX, H&R engine Mounts, 55lb injectors, G-body parts S.L.I.C, 9.5" (Dusty Bradford) PTC N/LU conv, Trans re-worked by Todd Lyle, Walbro 340, Hot wire kit, RJC powerplate, 3" TH down pipe, ATR 3" Stainless Steel dual exhaust, 4-Adjustable drag shocks, Southside uppers & lowers, Carrilo rods, JE forged pistons, Driveshaft loop, powdercoated & polished GTA rims.. 1986 GN - 6.76 @ 103.8 1/8th - SOLD 1987 WE4 - SOLD
|
|
March 5th, 2008, 10:23 PM
|
|||
|
|||
|
Ttt
|
|
March 6th, 2008, 08:52 AM
|
|||
|
|||
|
In your video with the stock bulbs when you make a right turn both sections of bulbs flash, why is it that when you make a left turn with the leds , only the outside section of bulbs flash- i thought both sections should flash sequentially?
__________________
87 Stage2 in the works!
|
|
March 6th, 2008, 01:02 PM
|
||||
|
||||
|
Quote:
 So this way with the LED's you will have that inner section "A Brake light" and the outside section is the turn signal. This way you always have a brake light on the same side as the turn signal. I thought that is one spot that needed improvement over the 20yr old set up. Or before they go into production (which is Very soon) maybe I can see if it could be done that way or not. Anyone intrested in or have questions on these Tailights feel free to call me at (865) 680-4008. Scot W.
__________________
Digital LED Tail lights 1986 T-Type GNXRay (X-ray clone) White W/black out trim, Grey leather int., LED taillights from InjectionX, H&R engine Mounts, 55lb injectors, G-body parts S.L.I.C, 9.5" (Dusty Bradford) PTC N/LU conv, Trans re-worked by Todd Lyle, Walbro 340, Hot wire kit, RJC powerplate, 3" TH down pipe, ATR 3" Stainless Steel dual exhaust, 4-Adjustable drag shocks, Southside uppers & lowers, Carrilo rods, JE forged pistons, Driveshaft loop, powdercoated & polished GTA rims.. 1986 GN - 6.76 @ 103.8 1/8th - SOLD 1987 WE4 - SOLD
|
|
March 6th, 2008, 07:21 PM
|
||||
|
||||
|
Quote:
__________________
Digital LED Tail lights 1986 T-Type GNXRay (X-ray clone) White W/black out trim, Grey leather int., LED taillights from InjectionX, H&R engine Mounts, 55lb injectors, G-body parts S.L.I.C, 9.5" (Dusty Bradford) PTC N/LU conv, Trans re-worked by Todd Lyle, Walbro 340, Hot wire kit, RJC powerplate, 3" TH down pipe, ATR 3" Stainless Steel dual exhaust, 4-Adjustable drag shocks, Southside uppers & lowers, Carrilo rods, JE forged pistons, Driveshaft loop, powdercoated & polished GTA rims.. 1986 GN - 6.76 @ 103.8 1/8th - SOLD 1987 WE4 - SOLD
|
