Digital LED Tailights for the TR

[scot w.]

Originally Posted by Cruzbear

Completed my install tonight everything works fine, including running lights and hazards together.

thanks,
Scott

Good to here Cruz! Your welcome.

Scot W.

[TR Custom Parts]

Scot! Any update from Spaghetti???

[scot w.]

Originally Posted by TR Custom Parts

Scot! Any update from Spaghetti???

Not yet. Mike the owner is going to e-mail me. When I recive that I will post it.

Give me a call..
Scot W.

[Silver Fox]

Originally Posted by TR Custom Parts

More pics, harness pics in last post show how all wires are spliced to like colors.

BTW, there is absolutely NO need to remove the bumper fillers or bumper. You do not even need to loosen the filler around the gas filler. All you do is stuff the wires from underneath right where the stock harness runs. Just hope Scot can figure this out for me. Leaning towards maybe a bad flasher?????

I do not have a volt booster on the car, I do have the Casper headlight upgrade harness but believe someone else has this and their lights work correctly.

Mark,

I cannot tell from your pic but which wire is the brown wire from the lights connected to? I have my brown connected to the brown on the smaller connecter (two wires in, three wires out to be precise).

Rob

[TR Custom Parts]

Originally Posted by Silver Fox

Mark,

I cannot tell from your pic but which wire is the brown wire from the lights connected to? I have my brown connected to the brown on the smaller connecter (two wires in, three wires out to be precise).

Rob

Got it connected to the brown wire that is right next to the yellow and green wire. And just for sh!ts and giggles I connected it to the wire you talked about too, no difference. No blinking with running lites on.

Guess this is one way to keep me off the streets at nite.

Scot, will give you a call tomorrow.

[Silver Fox]

Originally Posted by TR Custom Parts

Got it connected to the brown wire that is right next to the yellow and green wire. And just for sh!ts and giggles I connected it to the wire you talked about too, no difference. No blinking with running lites on.

Guess this is one way to keep me off the streets at nite.

Scot, will give you a call tomorrow.

I tried to help! Good luck with solving with problem. You will be happy when you get them working right.

Rob

[Royal-T-Ltd]

Mark, just to make you feel better [or possibly worse] - i feel your pain i have had the problem you speak of since late May, early June. Been talkin to Brian/Mike at Spaghetti, talked to Scott a couple of times, went on the PowerTour.. still fighting. My install was just like yours - i took the time to solder, shrink wrap, put in conduit, [even used quick disconnect, weathepack connectors inside the trunk], ran my power straight to the fuse box, have both flashers - All to no prevail... at least others feel my pain hopefully soon they can figure it out.

Originally Posted by TR Custom Parts

More pics, harness pics in last post show how all wires are spliced to like colors.

BTW, there is absolutely NO need to remove the bumper fillers or bumper. You do not even need to loosen the filler around the gas filler. All you do is stuff the wires from underneath right where the stock harness runs. Just hope Scot can figure this out for me. Leaning towards maybe a bad flasher?????

I do not have a volt booster on the car, I do have the Casper headlight upgrade harness but believe someone else has this and their lights work correctly.

[scot w.]

Yes it will be solved shortly! Spaghetti has a GN in there shop now that that very problem happened to them too. Mike is working on solving the issue as we speak and will be fixing our problems at no charge to you. So please bear with us.

Scot W.

[TR Custom Parts]

We're bearing. Too hot and humid to go to any cruises this week any way. I am just glad I am not the only one, was doubting my ability on this even though I have wired cars completely from scratch before.

[Blown&Injected]

Sounds like a few problems....Since I commented on how good the LED tail lights looked on my friends Mach 1, I fell compelled to say - they stopped working on his car.

[scot w.]

Sorry to hear about your buddy's car! This is just one problem only and a small one at that! The problem is with the voltage on just some of the Turbo Regal's, not all! On some, the voltage get's real funky when the running lights or headlights are on and the turn signal is on, this in return sends those funky voltages to the LED boards. Causing the issue. Spaghetti Will solve it and they should be fine. The great thing about my LED taillights is that " They have a Warranty" and a great company that takes care of there customers That those E-bay store's usually don't offer.

Scot W.

[Carr]

do you have ones that blink like the stock lights?

[scot w.]

Originally Posted by Carr

do you have ones that blink like the stock lights?

They can be made to do that! That would be a special order. you will have to talk to the company about having them do that for you.

Scot W.

[scot w.]

Originally Posted by scot w.

Yes it will be solved shortly! Spaghetti has a GN in there shop now that that very problem happened to them too. Mike is working on solving the issue as we speak and will be fixing our problems at no charge to you. So please bear with us.

Scot W.

GOT A CALL FROM MIKE @ SPAGHETTI ENG. TODAY AND THE VOLTAGE ISSUE WE WERE HAVING WITH THE VERY FEW CARS IS NOW FIXED!!!

I will contact those of you that I have spoken to over this and give you the details in regaurds to this.

Thank you for being patient while we solved this!

Scot W.

[leprcon]

please pm me with the instruction as well

[TR Custom Parts]

PM me too! My PM's are now open since I can never seem to get emails from you Scot! Two different computers at two different locations and TWO different email programs! If this works I will be a happy camper.

[scot w.]

Okay, PM's were sent to everyone that I have spoke to recently that has experianced the Same issue as Spaghetti & Me.

Scot W.