|
 |
 |
 |
 |
 |
 |
 |
|
|||||||
|
Welcome to the TurboBuick.Com forums. You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features. By joining our free community you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is fast, simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact contact us. |
 |
|
|
LinkBack | Thread Tools | Display Modes |
June 7th, 2006, 06:25 PM
|
||||
|
||||
|
scan master 2.1?
I am tiring to hook it up in the olds, I just swapped it out of the Gn and I don’t know what wire the feed can go too. I tired every wire on the back of the aldl none worked I want to know if you guys know what wire on the ecm I can hook it to work? I was going to post this in the hybrid section but it may be useful to those with aldl problems in the gns. If you know call 856-264-3392 eastern time till 10pm or tomorrow 9am-10pm or post up.
Thanks Don
__________________
92 TY 1167 Fast when it runs 500rwhp 93 TY Stock #0347 91 SY Stock #0803 93 TY Parts TY 92 TY Stock #1902 SOLD 87 GN Low Miles also fast when it runs 85GN with 87GN Swap Clone For Sale 85 T Stock 02 Z28 Sunburst Orange SOLD Looking for another LS1 anyone want to trade for a TY.     
|
|
June 7th, 2006, 11:38 PM
|
|||
|
|||
|
don , sorry i was out with hooper and jbenn , got in late and got your message on my ans machine , i left the answer you need on your voice mail .
you have the lc2 engine harness and 7148 ecm in that olds so just tap into A8 orange wire (smaller connector) at the ecm , ill fill you in on on the phone on how to get the olds ALDL usable for all scan tools so you can run a scanmaster
__________________
paul...magnabuick.com NJ rep 86gn bone stock shortblock ,ported irons ,71Q 75# , V2,ATR 3" HKS, ATR dual340m , 200-4r stageright, AC9"NL , TTWB 6.0, razor dual,msbc-1 ,LC-1.. 1.43 6.57 102.8 10.4 126.9 now w/ lonnie diers th400 w/brake, vig conv ,cometics 1.48,6.62,103.4,10.46, 126.9 87GN , duttneck, hipro, PTE65+ PP, 62TB, protorque 10.5", hooker duals, razor alky (dual), TTchip. prev combo stock unopened w/TA49, 50#..1.57, 11.45, 117 now 030, steel mains, dutt cam ,msbc-1 ,LC-1 ,Cottons 3"DP Tial gate ,ported irons/intake ,turbosaver ,TE44,75#inj, 4" zo6 maf , bad 60' ..93.78 ,117.88 11.54 21psi no race fuel ! no NOS ! all times on 93 octane big thanks to julio at alkycontrol.com eric at turbotweak.com Last edited by pacecarta : December 25th, 2007 at 09:57 PM.
|
|
June 8th, 2006, 10:11 PM
|
||||
|
||||
|
got it paul thanks a bunch got it running tonight. found out the maf is bad now i got to find a good used one. o2s also will not go above 300, i wil swap in a new o2 sensor tomorrow it still has the stock reg. another problem may be that the fuel pump he has in line is not strong enough. i dont know what it is how much it flows but i am guessing not enough. but before i start to drive it i need a boost gauge in it maybe tomorrow before fuds i will do that or this weekend.
__________________
92 TY 1167 Fast when it runs 500rwhp 93 TY Stock #0347 91 SY Stock #0803 93 TY Parts TY 92 TY Stock #1902 SOLD 87 GN Low Miles also fast when it runs 85GN with 87GN Swap Clone For Sale 85 T Stock 02 Z28 Sunburst Orange SOLD Looking for another LS1 anyone want to trade for a TY.
|
|
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
