![]() |
|
|||||||
|
Welcome to the TurboBuick.Com forums. You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features. By joining our free community you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is fast, simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact contact us. |
![]() |
|
|
LinkBack | Thread Tools | Display Modes |
|
|||
|
Door Lock Hard To Operate gets stuck and key unable to open door
my drivers side door lock became hard to operate if i push it down somemes it feels like it binds and and is super hard to push down or will go all the way but if i where to try and operate it with the key it wont go up my key looks like its twisted 45 degrees from tryen to get the lock up. i have to bring the lock up half way before i close the door so i can open it the next time i come to the car, anyone have any ideas?
![]()
__________________
you boosten? |
|
|||
|
Over time, the lock linkage can get dry and the various pivot points are dry and require more effort. Pull the top door panel off, and use some WD40 or similar lubricant to spray each of the pivot points in the door lock linkage. After you spray, work the lock mechanism until you free everything up.
__________________
87 Grand National - TE-44, Mease 3" DP, Mease stock Big-Neck I/C, HotWired Walbro 340, 160F Thermostat, 9" K&N filter, Accufab Adj. FP Regulator, ATR 2.5" SS Exhaust w/ Pit Bull Muffs, Adj. Wastegate, Custom Chip(Thanks Shawn!), Torque Strap, Airbags, Boxed Lower Control Arms, Eibach Pro-Kit Springs, Bilstein shocks. 3690lbs w/ driver. Best ET 12.64 @ 110mph (with a crappy 2.0 60') 06 GTO - stock 97 GTP - dp, ubend delete, fwi, lowering springs, bullitt wheels GWTRA |
![]() |
| Thread Tools | |
| Display Modes | |
|
|