|
 |
 |
 |
 |
 |
 |
 |
|
|||||||
|
Welcome to the TurboBuick.Com forums. You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features. By joining our free community you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is fast, simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact contact us. |
 |
|
|
LinkBack | Thread Tools | Display Modes |
August 17th, 2005, 12:54 PM
|
|||
|
|||
|
Pump Gas Set-up
Going to take car to track these week anyone care to take guess on what it'll run,
Car has ported champion iron heads and intake ported, 206 cam, 3.5dp, big front mount, 72lbs injectors, gtq70 turbo, 3400 stall converter, and 275 x60 m/t drag radials and boost set at 16lbs for pump gas?     
|
|
August 18th, 2005, 01:26 PM
|
|||
|
|||
|
id guess 12.0 at that boost without a trans brake
tires can handle a good launch but you probably wont get much boost under foot brake and your spoolup with the 70 will be slow similar setup i ran 10.99 with a 1.55 60 at 18lbs but off tbrake open dump with footbrake only managed 11.7s at same boost with 2.0 60's , could even get close to building boost before it pushed
__________________
paul...magnabuick.com NJ rep 86gn bone stock shortblock , ported irons ,LT GT71Q 75#inj , V2 , ATR 3"DP, HKS , ATR Double pumper, 200-4r, stageright , AC9"NL , TTWB 6.0 alkycontroll dual nozzle ,msbc-1 ,LC-1... 1.42 6.57 104.9 10.4 129.8 now trying out lonnie diers th400 w/tbrake 1.48,6.62,103.4,10.46, 126.9 87GN ,prev combo unopened motor TA49, duttneck 50# , dynotech hipro, protorque 10.5", alkycontrol, TT ..11.45 117 1.57 now .030 forged ,4 steel mains, dutt cam.. TE44 ,55# ,TT6.0 ,msbc-1 ,LC-1 ,cottons 3"DP Tail 38 ,cnc ported irons ,1.65 T+D ,ported intake , pte plenum and PP, 62 TB , duttneck, turbosaver.. 1.60 11.61 116 @20psi (walbro wont go any more  )all runs on quick chek 93 octane alkycontrol.com progressive meth injection turbotweak.com
|
|
August 20th, 2005, 10:28 AM
|
|||
|
|||
|
I would guess at least 11.30s.
I ran low 7s at the 1/8 mile track with all that stuff and a t63.16# and 93 without any alcohol.
__________________
TA perf. Motor built by ArizonaGN (Thanks Nick) PT76GTS,RJC intercooler,F.A.S.T XFI,Champion GN1 intake,83#,TA block and heads,224/224 solid roller,T&D 1.65 rockers,CP pistons,Total seal rings,ATR rods,Eagle crank,MSD billet dist.,7AL-2 ignition,PTC converter,TH400 w/T-Brake,ATR headers & exhaust
|
|
August 25th, 2005, 11:10 AM
|
|||
|
|||
|
i would guess mid 11s or better, i ran 11.90s on 17 psi and pump gas(no alky) on my little 44 on nittos and 11.60 at 112 on slicks. But that was in great weather so who knows
__________________
11.255 at 121.5 (best mph:124.1) 87 GN, PT61, mototron 60#s .030 over, TRW pistons, ported and polished iron heads, with Manley 1.77, 1.50 valves, ported intake, 204/214, ATR headers, 2.5" exhaust, 3" ATR DP ,ebay fmic, moser axles, LT1 MAF, fuel mods, home built billet tranny and a 3400 CK 10.5. air bags and umi lowers CAs ATR rear sway bar, PAC alky kit, 1LE 36mm front sway bar, QA1 economy coil overs, Howe longer ball joints,bilsteins, Richmond 3.23s, eaton posi, ls1 brakes. Dads 86 GN-ported heads, 204/214, ATR headers/exhaust, PT61, 60s, alky, 3400 9/11, ebay front mount (supporting mods...) 11.5 at 124.1 mph 24 psi. modded 85 GN and now a new 87 T.
|
|
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
