|
 |
 |
 |
 |
 |
 |
 |
|
|||||||
|
Welcome to the TurboBuick.Com forums. You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features. By joining our free community you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is fast, simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact contact us. |
 |
|
|
LinkBack | Thread Tools | Display Modes |
July 22nd, 2007, 05:37 PM
|
||||
|
||||
|
wtt c5 corvette 86/87 gn
testing the water for trades on my c5 vette. i got the car from a member on this board which i traded my tta for. i planned on selling it to a friend who wanted a vette. after i let him take it for a day he brought it back with a smoked trans. he paid to have the trans rebuilt but said the car was too much for him so he didn't want it. i ended up keeping it for the summer but i really miss my turbo car.the vette has 49k,level 3 trans with 3200 stall yank,heads,good size cam,long tube headers.dynoed @403rwhp with a 4000 stall so it should dyno a little higher with a 3200 stall. i have over 7k worth of receipts for work done on the car. everything works on the car no problems. i am a gm service consultant so only gm certified techs have worked on it. what i am looking for is a 86/87 gn, t, or t type with a solid body, good paint and preferably modded. let me know what you have. email me with details at tainted99man@yahoo.com
__________________
1999 30th trans am #290 12.95@105.00 stock with stall 1978 dodge lil red express 56k miles mint 1986 GN, 235cu. Bal & blueprinted 109 block, PT-70 gtq, Billit mains on 2&3, ARP main studs, J&E pistons/dry film coated w/ ceramic tops, Dry-Film coated bearings(rods,main,cam), M&A stage III alum heads-race ported-wire locked w/ARP studs, ATR headers, Hyd. flat tappet 221/218-525lift/cam, crower 1.65 roller rockers, race ported intake, 70mm Acufab TB, percision plenum,3"THDP, 85lb inj flow matched, P.T.E S/L IC, Razors ALKY kit, 9" 3800 N-stall N/L art-carr conv, Moser axles, H&R bar.out with a broken crank  low tens to follow
    
|
|
July 22nd, 2007, 05:37 PM
|
||||
|
||||
|
pics
  
__________________
1999 30th trans am #290 12.95@105.00 stock with stall 1978 dodge lil red express 56k miles mint 1986 GN, 235cu. Bal & blueprinted 109 block, PT-70 gtq, Billit mains on 2&3, ARP main studs, J&E pistons/dry film coated w/ ceramic tops, Dry-Film coated bearings(rods,main,cam), M&A stage III alum heads-race ported-wire locked w/ARP studs, ATR headers, Hyd. flat tappet 221/218-525lift/cam, crower 1.65 roller rockers, race ported intake, 70mm Acufab TB, percision plenum,3"THDP, 85lb inj flow matched, P.T.E S/L IC, Razors ALKY kit, 9" 3800 N-stall N/L art-carr conv, Moser axles, H&R bar.out with a broken crank low tens to follow
|
|
July 22nd, 2007, 05:38 PM
|
||||
|
||||
__________________
1999 30th trans am #290 12.95@105.00 stock with stall 1978 dodge lil red express 56k miles mint 1986 GN, 235cu. Bal & blueprinted 109 block, PT-70 gtq, Billit mains on 2&3, ARP main studs, J&E pistons/dry film coated w/ ceramic tops, Dry-Film coated bearings(rods,main,cam), M&A stage III alum heads-race ported-wire locked w/ARP studs, ATR headers, Hyd. flat tappet 221/218-525lift/cam, crower 1.65 roller rockers, race ported intake, 70mm Acufab TB, percision plenum,3"THDP, 85lb inj flow matched, P.T.E S/L IC, Razors ALKY kit, 9" 3800 N-stall N/L art-carr conv, Moser axles, H&R bar.out with a broken crank low tens to follow
|
|
July 22nd, 2007, 06:45 PM
|
||||
|
||||
|
Sent email....
__________________
87 GN..Sold. 89 TTA#934..Gone! 87 Turbo T..45K Mile Lt.Chestnut Beauty. 99Corvette...11.5@119.x Shawn...magna pot stirrer! 
|
|
July 23rd, 2007, 09:50 AM
|
||||
|
||||
|
Hello
Is the corvette able to be driven with no major issues? I have been considering a car I can drive without worry. I have a 87 Gn w/ 16000 miles few mods. Mostly stock.
|
|
July 23rd, 2007, 10:25 AM
|
||||
|
||||
|
e-mail sent
|
|
July 23rd, 2007, 08:53 PM
|
||||
|
||||
|
pics
i am working on a deal wright now but if it fall through i will get back to every one.
 
__________________
1999 30th trans am #290 12.95@105.00 stock with stall 1978 dodge lil red express 56k miles mint 1986 GN, 235cu. Bal & blueprinted 109 block, PT-70 gtq, Billit mains on 2&3, ARP main studs, J&E pistons/dry film coated w/ ceramic tops, Dry-Film coated bearings(rods,main,cam), M&A stage III alum heads-race ported-wire locked w/ARP studs, ATR headers, Hyd. flat tappet 221/218-525lift/cam, crower 1.65 roller rockers, race ported intake, 70mm Acufab TB, percision plenum,3"THDP, 85lb inj flow matched, P.T.E S/L IC, Razors ALKY kit, 9" 3800 N-stall N/L art-carr conv, Moser axles, H&R bar.out with a broken crank low tens to follow
|
|
July 24th, 2007, 07:19 AM
|
||||
|
||||
|
The cam is a Thunder Racing TRak cam 231/234 .640/.590 112 LSA. The heads on the car are PRC LS6 Stage 2 ported heads.
Jim, I see you can't stay away.
__________________
87 Turbo T DSR member 001 Twisted 6 Racing-
|
|
August 7th, 2007, 02:05 PM
|
||||
|
||||
|
deal fell through,went to look at a car and in my opinion was junk.if any one else is interested please email.this is a very nice vette and i am looking for somthing compared.
thanks jim
__________________
1999 30th trans am #290 12.95@105.00 stock with stall 1978 dodge lil red express 56k miles mint 1986 GN, 235cu. Bal & blueprinted 109 block, PT-70 gtq, Billit mains on 2&3, ARP main studs, J&E pistons/dry film coated w/ ceramic tops, Dry-Film coated bearings(rods,main,cam), M&A stage III alum heads-race ported-wire locked w/ARP studs, ATR headers, Hyd. flat tappet 221/218-525lift/cam, crower 1.65 roller rockers, race ported intake, 70mm Acufab TB, percision plenum,3"THDP, 85lb inj flow matched, P.T.E S/L IC, Razors ALKY kit, 9" 3800 N-stall N/L art-carr conv, Moser axles, H&R bar.out with a broken crank low tens to follow
|
|
August 7th, 2007, 06:50 PM
|
|||
|
|||
|
Quote:
Brian
__________________
87 Turbo T, Silver with maroon interior, and 35K miles. PTE 61-52E, CAS V-4, 42lb inj, 65mm t-b and HEMCO upper, TINMAN cold air kit. Powered by ALKY control. 11.77 @ 114, 23 psi 87 Turbo T, Blue on blue, ex DEA car, no options, all old school parts. Trans by me, 3400 stall O pump Art Carr N/L conv, Champion ported heads and intake, stock cam and bottom end w/ 117K, ESP front mount, TE-63, 55 inj, Hemco,3.42 gears with a locker, 10.84 @ 125 @25 psi 1.65 60ft on M/T drag radials Need a Hi Perf trans? Email me... hipsibri@cs.com
|
|
September 3rd, 2007, 07:02 PM
|
||||
|
||||
|
well i am going to try this one more time.plaese email me with pics or ??
__________________
1999 30th trans am #290 12.95@105.00 stock with stall 1978 dodge lil red express 56k miles mint 1986 GN, 235cu. Bal & blueprinted 109 block, PT-70 gtq, Billit mains on 2&3, ARP main studs, J&E pistons/dry film coated w/ ceramic tops, Dry-Film coated bearings(rods,main,cam), M&A stage III alum heads-race ported-wire locked w/ARP studs, ATR headers, Hyd. flat tappet 221/218-525lift/cam, crower 1.65 roller rockers, race ported intake, 70mm Acufab TB, percision plenum,3"THDP, 85lb inj flow matched, P.T.E S/L IC, Razors ALKY kit, 9" 3800 N-stall N/L art-carr conv, Moser axles, H&R bar.out with a broken crank low tens to follow
|
|
September 3rd, 2007, 07:06 PM
|
||||
|
||||
 
__________________
1999 30th trans am #290 12.95@105.00 stock with stall 1978 dodge lil red express 56k miles mint 1986 GN, 235cu. Bal & blueprinted 109 block, PT-70 gtq, Billit mains on 2&3, ARP main studs, J&E pistons/dry film coated w/ ceramic tops, Dry-Film coated bearings(rods,main,cam), M&A stage III alum heads-race ported-wire locked w/ARP studs, ATR headers, Hyd. flat tappet 221/218-525lift/cam, crower 1.65 roller rockers, race ported intake, 70mm Acufab TB, percision plenum,3"THDP, 85lb inj flow matched, P.T.E S/L IC, Razors ALKY kit, 9" 3800 N-stall N/L art-carr conv, Moser axles, H&R bar.out with a broken crank low tens to follow
|
|
September 3rd, 2007, 07:35 PM
|
|||
|
|||
|
I have sent you a Pm!!!
|
|
September 4th, 2007, 04:55 PM
|
|||
|
|||
|
tta1240,
More pictures of my T-TYPE posted in my for sale post. Check them out!!! 
|
|
September 4th, 2007, 08:06 PM
|
||||
|
||||
|
more pics of vette
    
__________________
1999 30th trans am #290 12.95@105.00 stock with stall 1978 dodge lil red express 56k miles mint 1986 GN, 235cu. Bal & blueprinted 109 block, PT-70 gtq, Billit mains on 2&3, ARP main studs, J&E pistons/dry film coated w/ ceramic tops, Dry-Film coated bearings(rods,main,cam), M&A stage III alum heads-race ported-wire locked w/ARP studs, ATR headers, Hyd. flat tappet 221/218-525lift/cam, crower 1.65 roller rockers, race ported intake, 70mm Acufab TB, percision plenum,3"THDP, 85lb inj flow matched, P.T.E S/L IC, Razors ALKY kit, 9" 3800 N-stall N/L art-carr conv, Moser axles, H&R bar.out with a broken crank low tens to follow
|
|
September 5th, 2007, 09:49 AM
|
||||
|
||||
|
I have a gorgeous 86 GN with 21k original miles, but it's all stock. If interested, PM me and we'll get you the info you need. Thanks.
__________________
Check out the fun toys at www.kcclassiccars.com where all prices are clearly posted. Discounts for any TB.com member who is registered at least a month before contacting me! 68 GTO, 400 4 speed, blue/black, matching #s 86 Vette Pace Car, 62k original miles, red/gray leather 71 Camaro 355, yellow/black, split bumper, gorgeous 68 GTO, 400, Baer brakes, Gear Vendors overdrive, leather interior, 17 inch wheels, resto-rod! 73 Mustang convertible--blue/white, just 87k miles 95 Vette LT1, rare Bright Aqua, Leather, low miles
|
