Go Back   TurboBuick.Com > Electronics > Car Audio
Register FAQ Members List Photo Gallery Mark Forums Read



Welcome to the TurboBuick.Com forums.

You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features. By joining our free community you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is fast, simple and absolutely free so please, join our community today!

If you have any problems with the registration process or your account login, please contact contact us.
Reply
 
LinkBack Thread Tools Display Modes
  #1 (permalink)  
Old August 28th, 2001, 08:10 PM
Junior Member
 
Join Date: May 2001
Trader Rating: (0)
Posts: 13
help head unit shorting out

I just bought a stock 87 gn and it came with an upgraded head unit. I want to put the stock one back but when I did it started smoking even though it seemed to work fine. I can't figure out why it would short out when the new one didn't. both are connected with the stock connectors. Is it possible the power antenna could be the culprit? If anyones had similar problems please let me know

TIA

Paul Nagel
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote
  #2 (permalink)  
Old August 28th, 2001, 09:15 PM
Audiowizard's Avatar
CARE FOR A SMOKE ANYONE?
 
Join Date: May 2001
Location: Wichita Falls, Tx
Trader Rating: (0)
Posts: 1,115
If you are using the same factory plug that operated the aftermarket head unit to plug back into the original style radio then the "short" is probably something inside the Delco that started to smoke for a few seconds and quit. If it is working fine then I wouldnt worry too much about it. It could be a substance that got on the internals that just burned off when energized. Just make sure that you have the proper size fuses in just in case it decides to short out again. Make sure that there isnt any bare wires making contact with any metal.
__________________
1986 Buick Grandnational

MODS: 17" x 8" Billit Centerline "Champ 800's" wrapped in 225/45 Nitto 450s, Bell Tech 2" dropped front spindles, High flow cat/dual 2.5" diameter mandrel bent pipes and Flowmaster Delta Flows with dumps in front of rear axle, '87 GN grille, Polished aluminum mass air flow pipe with K&N on a 150,000 plus mile stock unopened motor.
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote
Reply


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


All times are GMT -5. The time now is 03:16 AM.

Powered by vBulletin Version 3.6.2
Copyright ©2000 - 2009, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.2.0
One of the largest message boards on the web !