![]() |
|
|||||||
|
|
| Brakes, Suspensions, Tires & Wheels We will have the best to deliver tech advice here. Under Construction |
|
Welcome to the TurboBuick.Com forums. You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features. By joining our free community you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is fast, simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact contact us. |
![]() |
|
|
LinkBack (4) | Thread Tools | Display Modes |
|
||||
|
Alright guys im working on it...will try to get some pics posted tonight
__________________
Taylor Moore DSR Member 025 87' Grand National-GT6776RH, FAST XFI, FAST Dash Datalogger, Precision FMIC, Alky Control, THDP, 83lb Injectors, Red's Double Pumper, Volt Booster, Diamond .20 Over Pistons, Eagle Crank, K1 Rods, RJC Girdle, Champion GN1-R Alum Heads, Champion Complete Race Intake, Cottons 212/212 Roller Cam Kit, PTC 9.5" 3400 Non Lock-up, Accufab Regulator, Accufab 70mm Throttle Body, TA Stainless Steel Headers, HR Motor Mounts, Moog Problem Solvers, Brians 2004R... Old Combo-11.88 @ 114.00 1.80 60' No times with new combo yet. New motor built by Geoff @ Jackson Cylinder Head Jackson, Mississippi 601-353-1014 |
|
|||
|
Quote:
if so, man that kinda sux! I've already ordered a set, mine should be here late next week. Please keep us posted. |
|
||||
|
the center cap was hitting the grease cap. the grease cap is metal so i just flattened it out with a hammer until the rim would sit flush, it worked fine. I also used my 1/4 inch spacers, but it didnt need them
__________________
Taylor Moore DSR Member 025 87' Grand National-GT6776RH, FAST XFI, FAST Dash Datalogger, Precision FMIC, Alky Control, THDP, 83lb Injectors, Red's Double Pumper, Volt Booster, Diamond .20 Over Pistons, Eagle Crank, K1 Rods, RJC Girdle, Champion GN1-R Alum Heads, Champion Complete Race Intake, Cottons 212/212 Roller Cam Kit, PTC 9.5" 3400 Non Lock-up, Accufab Regulator, Accufab 70mm Throttle Body, TA Stainless Steel Headers, HR Motor Mounts, Moog Problem Solvers, Brians 2004R... Old Combo-11.88 @ 114.00 1.80 60' No times with new combo yet. New motor built by Geoff @ Jackson Cylinder Head Jackson, Mississippi 601-353-1014 |
|
||||
|
http://i241.photobucket.com/albums/f...1/DSCN0775.jpg
http://i241.photobucket.com/albums/f...1/DSCN0774.jpg http://i241.photobucket.com/albums/f...1/DSCN0773.jpg http://i241.photobucket.com/albums/f...1/DSCN0769.jpg
__________________
Taylor Moore DSR Member 025 87' Grand National-GT6776RH, FAST XFI, FAST Dash Datalogger, Precision FMIC, Alky Control, THDP, 83lb Injectors, Red's Double Pumper, Volt Booster, Diamond .20 Over Pistons, Eagle Crank, K1 Rods, RJC Girdle, Champion GN1-R Alum Heads, Champion Complete Race Intake, Cottons 212/212 Roller Cam Kit, PTC 9.5" 3400 Non Lock-up, Accufab Regulator, Accufab 70mm Throttle Body, TA Stainless Steel Headers, HR Motor Mounts, Moog Problem Solvers, Brians 2004R... Old Combo-11.88 @ 114.00 1.80 60' No times with new combo yet. New motor built by Geoff @ Jackson Cylinder Head Jackson, Mississippi 601-353-1014 |
|
||||
|
Tell me what you all think and if the links works for yall....Thanks guys
__________________
Taylor Moore DSR Member 025 87' Grand National-GT6776RH, FAST XFI, FAST Dash Datalogger, Precision FMIC, Alky Control, THDP, 83lb Injectors, Red's Double Pumper, Volt Booster, Diamond .20 Over Pistons, Eagle Crank, K1 Rods, RJC Girdle, Champion GN1-R Alum Heads, Champion Complete Race Intake, Cottons 212/212 Roller Cam Kit, PTC 9.5" 3400 Non Lock-up, Accufab Regulator, Accufab 70mm Throttle Body, TA Stainless Steel Headers, HR Motor Mounts, Moog Problem Solvers, Brians 2004R... Old Combo-11.88 @ 114.00 1.80 60' No times with new combo yet. New motor built by Geoff @ Jackson Cylinder Head Jackson, Mississippi 601-353-1014 |
|
||||
|
Quote:
How are they compared to draglites, stars, etc. wieght wise??
__________________
1985 TType. '97-'06 '87 intercooled conversion. PT54, unopened engine. 11.19 @ 119 Sold 1987 Turbo T. TSM car from '06-'10 9.67 @ 142 1.56 60' on slicks 9.71 @ 137 1.46 60' on 275 radials off foot brake Sold New car: '87 Turbo T. Starting over from the beginning...THS build ![]() Best 1/4 11.5 @ 116 Best 1/8 7.70 @ 92 TA49 and other basic bolt ons, unopened engine. Hope to run 10's with this combo. My old TSM engine going in soon
|
|
||||
|
Man those do look sweet!! Maybe some day I will get tires for mine.
__________________
http://www.cardomain.com/memberpage/637073/2 Current pics:http://www.turbobuick.com/forums/sho...d.php?t=168306 87T-Te-45a/V1/72"s/DP/Girdle/Je's/70TB&DH/3400 911/CenturyTrans/PortedIrons/TAFrontCover/4"SingleShot/4"CAI/Ari.GN Rad/Hrparts.upsanlows+ more...10:82@124 @23LBS With 1.73 60ft more http://videos.streetfire.net/video/A...BA3DA9822F.htm New Exhaust>> http://www.turbobuick.com/forums/sho...d.php?t=194282[url] BURNOUT http://www.turbobuick.com/forums/turbo-videos-picture-library/201365-small-burnout-other-night-lowes.html Razors Dual Nozel Alky via 26 lbs! |
|
||||
|
Not sure about the weight check the billet specialties website they are listed on there but they are pretty light...thanks for the opinions
__________________
Taylor Moore DSR Member 025 87' Grand National-GT6776RH, FAST XFI, FAST Dash Datalogger, Precision FMIC, Alky Control, THDP, 83lb Injectors, Red's Double Pumper, Volt Booster, Diamond .20 Over Pistons, Eagle Crank, K1 Rods, RJC Girdle, Champion GN1-R Alum Heads, Champion Complete Race Intake, Cottons 212/212 Roller Cam Kit, PTC 9.5" 3400 Non Lock-up, Accufab Regulator, Accufab 70mm Throttle Body, TA Stainless Steel Headers, HR Motor Mounts, Moog Problem Solvers, Brians 2004R... Old Combo-11.88 @ 114.00 1.80 60' No times with new combo yet. New motor built by Geoff @ Jackson Cylinder Head Jackson, Mississippi 601-353-1014 |
|
||||
|
P275/50R15 Mickey Thompson ET Street Raidal on 15 by 8's and 15 by 3.5 with 26 inch Mickey Thompson Sportsman Fronts
BackSpacing=3.5 on the 15 by 8's
__________________
Taylor Moore DSR Member 025 87' Grand National-GT6776RH, FAST XFI, FAST Dash Datalogger, Precision FMIC, Alky Control, THDP, 83lb Injectors, Red's Double Pumper, Volt Booster, Diamond .20 Over Pistons, Eagle Crank, K1 Rods, RJC Girdle, Champion GN1-R Alum Heads, Champion Complete Race Intake, Cottons 212/212 Roller Cam Kit, PTC 9.5" 3400 Non Lock-up, Accufab Regulator, Accufab 70mm Throttle Body, TA Stainless Steel Headers, HR Motor Mounts, Moog Problem Solvers, Brians 2004R... Old Combo-11.88 @ 114.00 1.80 60' No times with new combo yet. New motor built by Geoff @ Jackson Cylinder Head Jackson, Mississippi 601-353-1014 |
|
|||
|
Just go mine tonight as well, look good in the boxes!
__________________
86 TR WH1 Leather,column,astroroof Hartline XFI w/6 bank egt, ITS billet 71 DBB BWR 3.5 dp w/Trbosmrt gate,ISAC controller Champ Intake,GN1's,T&D's,83's,distributor,AL2 Razor alky, P-stroke IC, 210/215 roller, Forged stroker, TA headers, HR Bar Lonnie D Stage 2, PTC 9.5 N/L, 325/50's My balls write cheques that my luck can't cash.......
|
|
|||
|
Quote:
I've also ordered 15x8 rears but 15x7 fronts since my car rarely sees the track. ordered them with 3.5" b.s. front and rear. |
|
|||
|
Here is my new 15x10 with 5.5 bs
![]() ![]() Not shown are the bolt on center caps
__________________
86 TR WH1 Leather,column,astroroof Hartline XFI w/6 bank egt, ITS billet 71 DBB BWR 3.5 dp w/Trbosmrt gate,ISAC controller Champ Intake,GN1's,T&D's,83's,distributor,AL2 Razor alky, P-stroke IC, 210/215 roller, Forged stroker, TA headers, HR Bar Lonnie D Stage 2, PTC 9.5 N/L, 325/50's My balls write cheques that my luck can't cash.......
|
|
|||
|
wow !!!! I need a set
GNAT87 do they stick out in the rear ??? have any rear shots?? is the car sitting up in the rear because it was jacked up and hasn't been driven yet ?? ..... I need to "try" different backspacing for another car ... who has a 10" rim with a 6" backspace
__________________
Dan RX 7 Buick is running !! ![]() 92 Olds barge wagon .. Buick powered of course!! ![]() People swapping insults and other wise-ass remarks on the internet are like two dogs barking at each other threw a fence. They usually start waging their tails when they come to an open gate. ![]() 86/87 GN and 89 TTA .. lots of parts !! Stuff has to go !!! email ttastage2@yahoo.com |
|
||||
|
They sit about flush with the edge of the fender well maybe a tad further but not much and its sitting up in the back because of the air in rear bags i believe...I will work on getting pics of the rear tomorrow and post them
Thanks Taylor
__________________
Taylor Moore DSR Member 025 87' Grand National-GT6776RH, FAST XFI, FAST Dash Datalogger, Precision FMIC, Alky Control, THDP, 83lb Injectors, Red's Double Pumper, Volt Booster, Diamond .20 Over Pistons, Eagle Crank, K1 Rods, RJC Girdle, Champion GN1-R Alum Heads, Champion Complete Race Intake, Cottons 212/212 Roller Cam Kit, PTC 9.5" 3400 Non Lock-up, Accufab Regulator, Accufab 70mm Throttle Body, TA Stainless Steel Headers, HR Motor Mounts, Moog Problem Solvers, Brians 2004R... Old Combo-11.88 @ 114.00 1.80 60' No times with new combo yet. New motor built by Geoff @ Jackson Cylinder Head Jackson, Mississippi 601-353-1014 |
|
||||
|
pics do this one NO justice!!!!!!!!
__________________
1987 buick we4 rebuilt stock motor, pt52 turbo, precision front mount, alky injection, 27lbs boost, lonnie deirs 200r4, scanmaster 2.1, hooker 2.5 inch exhaust,3in thdp, digital egt meter from pte, direct scan software, auburn posi, moser 31 spline axles, metco lowers, chassis engineering drag shocks, dual rear air bags, auto meter phantom boost, oil pressure, and water temp gauges, weld rodlite wheels, 28x10 hoosier slicks, pts 3200 convertor, 10.95@124 |
|
||||
|
The Billet street lites do look sharp. Now I am am torn between them and these: https://centerlinewheels.com/wheel_d...ehicle&data=86
__________________
11.09@123 with a PT-51 |
|
||||
|
Here is a couple picts of my dads T Type with his new Billet Specialties wheels taken on my cell phone in crappy weather the other day. They just came in from Billet...had been on order since the middle of Dec! The rears 15x8 4.5 back space with Hoosier Quick Time Pros 28x10. Front 15x6 3 back space with BF 205/70s for the street since the car is driven to the track.
I have added dust covers on the front and back...not sure Im gonna stick with them or take them off. Not sure if I like not being able to see through the wheel...at least on the rears anyway. What do you guys think?? Car was out once last year and posted a 10.61@129 on et streets, full exhaust and the a/c still blows cold Hope the new wheels will make it faster
|
|
|||
|
VERY NICE!!!
I'm still considering buying a set of those. just can't make up my mind.
|
|
||||
|
Center cap
How did you get the center caps on the fronts. mine are a 1/2" too shallow?
__________________
87 GN with T-Tops. And a 87 GN T-Top car, 109 Block, Speed-pro Bank to Bank with 84 lb Delphi Injectors, Bowling Green Intake with a 70mm throttle body, DLS 218 Billet roller cam, GN-1 heads with T&D 1:65 rollers, J&E .030 pistons with ATR Rods, PTE70GTQ dbl ball bearing turbo ATR 3" dual Stainless exhaust with Pit bull muffs , Jack Cottons front mount with a CAS three pass radiator with a Ramchargers Dual fan, Fiberglass hood and MSD Distributor 7AL-2, ATR Stainless Headers and 3" down pipe with HKS external wastegate from header into downpipe. Ready to be tuned!!! New dyno results Street Stuff 10-18-08. 606 rwhp 580 torque. |
|
||||
|
Thanks at7we2 dont think you will be disapointed if you do.
XXQUICK6XX must be something to do with the width of your fronts. I see you said you got the 15x3 1/2s and these are the 15x6 inch width version. I had to wait on these a month longer than the rears...maybe something they knew they had to correct before they let any more out. Heavy D thanks for the compliment! He will appreciate it! He really likes the new look over his Welds pro stars. I was told by the sales guy at Summit that the price on these were going up soon...$230-$240 was an into price to see how much interest they were gonna get so you might want to pull the trigger sooner than later. As far as the tires they are a true 28 inch tall by 10 and the 205/70 measures 27 inch tall to help off set the 2 inch taller rear height.Any other questions feel free to ask guys. Last edited by Limited87; March 11th, 2008 at 11:07 PM. |
|
||||
|
Rims
I got the 15x4 fronts?
__________________
87 GN with T-Tops. And a 87 GN T-Top car, 109 Block, Speed-pro Bank to Bank with 84 lb Delphi Injectors, Bowling Green Intake with a 70mm throttle body, DLS 218 Billet roller cam, GN-1 heads with T&D 1:65 rollers, J&E .030 pistons with ATR Rods, PTE70GTQ dbl ball bearing turbo ATR 3" dual Stainless exhaust with Pit bull muffs , Jack Cottons front mount with a CAS three pass radiator with a Ramchargers Dual fan, Fiberglass hood and MSD Distributor 7AL-2, ATR Stainless Headers and 3" down pipe with HKS external wastegate from header into downpipe. Ready to be tuned!!! New dyno results Street Stuff 10-18-08. 606 rwhp 580 torque. |
|
|||
|
Quote:
28x11.5-15 Quick Time Pros. I wanted to see if you could Clear this up for me Did order those wheels right from Billet my they could bulid some wheels with some custom BackSpacing. Again Car looks grate with those Wheels |
|
|||
|
Quote:
28x11.5-15 Quick Time Pros. I wanted to see if you could Clear this up for me Did order those wheels right from Billet my they could bulid some wheels with some custom BackSpacing. Again Car looks grate with those Wheels |
![]() |
| Thread Tools | |
| Display Modes | |
|
|
LinkBacks (?)
LinkBack to this Thread: http://www.turbobuick.com/forums/brakes-suspensions-tires-wheels/232925-anyone-using-billet-street-lite-race-wheels.html
|
||||
| Posted By | For | Type | Date | |
| Geo Prizm Dashboard, Trunk Lock Geo Prizm, 1990 Geo Prizm - Yamahadrum | This thread | Refback | March 10th, 2009 04:28 AM | |
| 1990 Geo Storm Crankshaft Sprocket, 1990 Geo Prizm, 1990 Geo Tracker Proportioning Valve - Hitechheaders | This thread | Refback | March 8th, 2009 12:59 PM | |
| TurboBuick.Com | This thread | Refback | December 29th, 2007 03:13 PM | |
| TurboBuick.Com | This thread | Refback | December 20th, 2007 11:26 AM | |