- O2 Corrections
- Xfi wiring Mods.
- Greddy E-Manage
- Replay data goofed up BS3
- Big Thanks To Hartline Performance!!!!!!!
- Turbotweak+alky, ATS before or after alky nozzle?
- How to Flash XFI
- cal/holly hartline
- ECM or Accel Batchfire ?
- need some help
- rotor phasing
- Gen 7 outputs....
- Rate sensor calibration
- Batch versus Sequential Veterans Help
- high idle with fast
- How many bungs do I need????
- 83 Lbs. Fast Tune
- How to add a wire to FAST XFI plugs?
- Precision Harness adapter
- Newbe with Fast B2B
- Classic Fast Inconsistent Closed Loop Delay
- need gd ecm now PLEASE HELP
- New To The Big Stuff3 World!!!!!!!
- 3 bar map voltage
- o2 volts for gen 6 DFI
- FAST xfi question on 87GN
- bs3 to closed loop?
- Wide Band Correction
- XFI 3.5 bar Map Issue
- power plate & alky
- FAST not reading knock
- Hartline XFI Service
- TC lockup with XFI
- What's your MAP values at idle with XFI?
- xfi
- knock sensor
- 2 cars/ 2 fast systems/ no a/c
- fast always on
- What is your SYNC set at?
- Accel gen 6 program for 50#'s
- Fast Help: Map sensor not matching
- FAST xfi and laptops
- Fan control when starting (FAST B2B)
- Wide band not reading
- Installing Casper's adapters for FAST XFI
- XFI and nitrous
- Setting up XFI
- Injector Duty Cycle on XFI shows zero
- How did you mount XFI
- Where does MAP connect
- Help on Fast
- XFI cam sync flag
- how to use AUX outputs on XFI?
- What happened? FAST Classic related
- Accel DFI Vers. 6 ERROR # 68#
- XFI how do you like it?
- B2B converted to SFI
- Help with FAST log file not an XFI
- Cal H....
- help with xfi o2
- Start-up for FAST system
- Heated O2 with Accel Gen 6 DFI
- FAST: Should TPS go to 100%
- Couple fast issues
- gen 7 duty cycle seems off?
- start up tune
- DFI Gen VII and Starting/Idle problems
- XFI transbrake control question....
- Need To Contact Cal Hartline Asap
- mph signal & xfi?
- A/C - no-op
- gen 7 has a birthday!
- xfi config file
- Please Help Going To Track
- Precision FAST harness wiring question
- XFI Aux ports
- How To Share Fast Log
- Motec
- Need help setting up FAST dashboard and data logger touch screen
- Data Logging with FAST XFI
- what am i missing??
- FAST Wideband wires ??
- 3.5 bar help
- Classic Fast Wiring Question
- Chevy 427 motor
- Megasquirt Qs
- BS3 help
- Mid throttle hesitation/Rich AFR Classic FAST:
- Thanks Craig Smith
- Late model V6 needs stand alone for fuel/spark
- DFI communication issues
- xfi,msd crank trigger/dist. wiring
- dvd
- modifying factory wiring for XFI
- Anyone using XFI to monitor EGTs?
- FAST issue
- Need help w/ Fast Data Logger
- big stuff 3 after start help
- car running way too rich out of nowhere?
- Help FAST file, data log file!
- Way too much fuel!!! O2 or Map (F.A.S.T)
- AMS 1000 installation ???s...need some tips
- WB Sensor
- Big Stuff 3 Start up Program Help
- XFI PA comments
- "Homemade" XFI MAP jumper harness??
- New but Bad 02 Sensor
- UEGOS #'s/ BS3
- Lambda sensor icon
- BS3, cranking issues (long time to start)
- Which one???
- XFI startup timing tearing up starters?
- New Laptop DFI Issues ..
- Gen II settings
- Classic Fast issues Car is way rich at idle.
- FAST wont connect???????
- all wired up and trying to get the lose wires on
- terminals gen7
- Help with DFI harness!!!!!!
- help with laptop connection
- help installing bs3
- Help with fast XFI
- BS3 tuning
- Anybody have any experience with the Translator Pro?
- XFI voltage reading lower then at alternator??
- Classic FAST wiring problems
- bigstuff3 and alkycontrol?
- I'm STUMPED!!
- ecm
- fast and gen 7
- wideband
- NuB ECM wos
- Megasquirt System
- Question installing FAST
- No start feature on XFI
- 75# start up program for fast
- delete wrong forum
- What do you think would cause this???
- What happens at max ESC retard with FAST B2B?
- XFI internal data logger install ?
- Complete Accel DFI6 System w/VIC, 2maps Pics
- Engine Management Choices...
- XFI - MPH scaler ?
- What is the best Windows platform for FAST XFI?
- XFI knock retard: values that match GM setup
- need help to setup xfi with dis. for two step
- Buick (s/c) OBDII ECM for turbo 3.8
- Installing XFI
- Craig Smith...most excellent fixer dude...
- Target A/F
- ???s on XFI...
- No speedo on BS3
- new xfi install,,will not start..please help
- C.N.P Coil Near Plug/ Coil on Plug
- M.A.F.less Translator system
- Flat RPM in second gear
- Vp Q16?
- VE table shows no psi.
- few questions
- Best PC Screen for Daylight Viewing?
- XFI and 50lb High Z Injectors
- XFI thumbwheel install question?
- XFI Fault Code
- XFI-To update... or not to update....?
- closed loop gain #'s for big injectors (XFI)
- ecm
- Traction Contol
- XFI wide band O2 file?
- Fast B2B datalog questions
- NOS screen setup on DFI ver. 6.32
- XFI - Oil & Fuel Pressure Not Working
- XFI - SES - Error Code 2 - #4???
- need some help. please!!!!
- wideband visual guage for XFI
- More Gen6 Questions...IAC related
- XFI communication problem, but different...
- Newb Gen6 Tuning ?s
- Vista/C-com/XFI
- Ok Detectives, here are your clues....
- XFI Qwik Tune
- FAST Sequential
- XFI and Various Fuels (Gasoline, E85, Methanol)
- Remove XFI if welding??
- Where to buy FAST system
- 120 Amp vs.200 Amp Alternator
- What is done to modify a ECM ?
- Location of IAT sensor...
- Speed pro worth getting
- GM Fuel Sensor PM - XFI
- 200 AMP alternator upgrade
- Diameter of Mounting Holes in XFI Box?
- Tune Up for Emissions Testing??
- softwere for fast system
- XFI Module Install Pics?
- FAST XIM Module
- Aftermark engine management system – nice to have or need to have?
- whats better?
- FAST PTE Harness O2 Question
- electric speedo / XFI ???'s
- Bad ECM :(
- inductive delay settings?
- FAST, BHJ reluctor clocking/timing probs.... can I compensate with XFI?
- F.a.s.t (b2b) Gct
- E-Dist
- classic fast system
- Auxiliary Pwr Source to ECM
- COnnecting to FAST
- Need help finding a lap top screen for.
- XFI and flying lead......
- Ecm
- Question about the chip/ecm in my car
- i hear accell is a better tune?
- ECM problems??
- Target A/F numbers
- F.A.S.T b2b info
- F.A.S.T. Software Online
- modded ECM and 83's
- 3.5 bar map for direct replacement???
- Old Gen 6 Seq. Interface Module
- 84 Riviera Digital Dash /Regal Direct Plug in?
- 160 lb injectors really just 121 lb?
- Inj and XFI
- anyone using Racetronix 79# injectors?
- c-com DOS 1.405
- Best price for upgrading stock ECM for large injectors?
- CHANGING from 65 LBS. TO 83 LBS. inj.
- Low Z injector w/ATR 7th Injector?
- Timing at 30 lbs?
- FAST B2B- Not reading wideband sensor all of a sudden???
- FAST XFI Dash/Datalogger
- Is there a way to ignore false knock with XFI?
- xfi o2 sensors?? need to buy one
- FAST/false knock
- Using the XFI to control WOT torque convertor lock up
- big stuff 3/boost control question
- FAST..What's better
- Boost Timing Master
- WB o2 questions
- Checking in....with Videos!
- FAST XFI IAC Question
- 160lb FAST VE table
- Suggestions for 3 channel monitoring system.
- Msd Boost Command?
- Looking for a Startup File
- Inj Duty Cycle
- BS3 GEN3 logging capabilities
- Upgrades for classic FAST units
- VE Table changes...totally confused
- millavoits
- FAST start up file for new combo