|
 |
 |
 |
 |
 |
 |
 |
|
|||||||
|
|
| Alcohol, Nitrous and Propane Tech Tech support for Alchohol, Propane and Nitrous |
|
Welcome to the TurboBuick.Com forums. You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features. By joining our free community you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is fast, simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact contact us. |
 |
|
|
LinkBack | Thread Tools | Display Modes |
June 12th, 2003, 10:20 PM
|
|||
|
|||
|
SMC parts forsale!
I have forsale the 1/2 gal SMC alcohol container with built-in pump.
4ft of -3AN line so you can locate the container elsewhere if you want. I also have the original line. SMC Alky controller. Low level warn, pump speed, turn on point, test button. I also have the dual nozzles supplied from SMC. Parts are like new and have only been used for a few months. I have upgraded to higher flowing / higher capacity system and am using my computer to control the tuning, so I don't need these. All you would need to complete the kit is the nozzle "block" from SMC. Let me know if you are interested. Thanks! 
    
|
| Sponsored Links |
|
June 13th, 2003, 06:59 PM
|
||||
|
||||
|
Are you parting this out or is it a complete set? I'm interested in the dual nozzle set-up to upgrade my single nozzle. Let me know which way you are going and a price. Thanks.
__________________
"Lethal GN"....gone, but not forgotten.
|
|
July 28th, 2003, 05:34 PM
|
|||
|
|||
|
BUMP.
I got offers for some of the individual parts, but they were pretty low and still left some parts unsold, so I want to try again: I'm willing to sell it ALL for $250 + shipping. Its $350 new, my parts include the longer SS line and fittings which costs an additional $20-$25. I will also provide the nozzles, and if you want to use them in single nozzle config, the kit is complete. If you want to use them in dual nozzle, you need the "dual nozzle distribution block" from Steve, which is just a bunch of brass connectors and you can get it pretty cheap. Thanks. Last edited by spins4; July 28th, 2003 at 05:42 PM.
|
|
July 29th, 2003, 04:43 PM
|
|||
|
|||
|
miles?
YGM
__________________
97 Riviera Supercharged 13.951 @ 97.97 2.06 60' Last edited by UrbsNSpices; July 29th, 2003 at 04:49 PM.
|
|
July 29th, 2003, 05:11 PM
|
||||
|
||||
|
So what your missing is the M15 nozzle and 1/8 pipe adapter. The nozzles are less than 5 bucks from McMaster Carr and the adapter can be purchased at Home Depot under 2.00. Ohh the 3/8 washer to help hold the nozzle in place..less than 20 cents at Home Depot.
Hope this helps ya..
__________________
"Humble yourself in the sight of the Lord, and He will lift you up." - James 4:10 Always on 93 octane www.alkycontrol.com 813-265-1400 http://stores.ebay.com/ALKYCONTROL_W...eNameZl2QQtZkm
|
|
July 30th, 2003, 12:52 PM
|
|||
|
|||
|
nozzle holder mod needed
Guys-
If you dont drill out the street elbow first you will crush the nozzle- call me to get the right part please!
__________________
Steve Chlupsa SMC Enterprises schlupsa31@mchsi.com www.smcenterprises.com
|
|
July 30th, 2003, 12:55 PM
|
||||
|
||||
|
The 1/8 street elbow currently available at home depot is offset so no crushing can occur
 ..one of its legs is longer than the other.its not symetrical like the older style's..also I use a stainless washerBTW..Welcome Steve.. HTH
__________________
"Humble yourself in the sight of the Lord, and He will lift you up." - James 4:10 Always on 93 octane www.alkycontrol.com 813-265-1400 http://stores.ebay.com/ALKYCONTROL_W...eNameZl2QQtZkm
|
|
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
