Go Back   TurboBuick.Com > Vendors Specials and Vendor Customer Service > Advertiser Specials
Reload this Page Overstocks, Clearance Items and a couple good deals
Register FAQ Members List Photo Gallery Mark Forums Read



Welcome to the TurboBuick.Com forums.

You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features. By joining our free community you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is fast, simple and absolutely free so please, join our community today!

If you have any problems with the registration process or your account login, please contact contact us.
Reply
Page 1 of 2 1 2 >
 
LinkBack Thread Tools Display Modes
  #1 (permalink)  
Old July 11th, 2007, 01:20 PM
I was here first
  
Join Date: May 2001
Location: ClintonTwp Mi
Trader Rating: (1)
Posts: 2,360
Overstocks, Clearance Items and a couple good deals
Here a few items that are either overstocks or clearance items that I would like to move out. There is a couple just good deals as well. Limited quanities are first come, first served. When they are gone, they are gone.

Cat forged Rods with ARP bolts, these are nice $279.99 3 to sell

Pats Performance NON-Lock 10" converters 3200+ stall $375 2 to sell

GT6776E turbo 3" inlet with standard Actuator $799 complete 1 to sell

FAST XFI system with casper plug and play harness $1450 NEW IN BOX 1 to sell

Cat Block Girdles - complete with chrom moly hardware, This item has PROVEN itself in the field to be the best deal, If your not happy send it back, ZERO failures from this unit. $129.99 10 to sell

Billet Fuel Presure regulators - nice silver awesome quality $85 20 to sell

4" polished MAF pipes with built in MAF sensor - these are HOT!!! and flying out the door. $149.99 pipe, sensor, hose and 2 clamps 20 to sell

I also have one 3.5" Original Terry Houston Downpipe I have never opened it, it is complete with dump and hardware. I was saving it but changed my mind today about a few things $575.00

If you want these deals you have to CALL no emails or web orders will be honored at these prices


Thanks,
Mike Licht
Full Throttle Speed
586 294 4404
__________________
www.fullthrottlespeed.com
Tech:www.fullthrottletech.com
Home of the FASTEST hydraulic roller cams for Turbo Buicks
___________________________________________
Disclaimer:
The poster does not take any responsibility for any bad feelings or sense of exclusion that the reader of this post may have-whether real or imagined. Reading threads poses inherent risks. The poster of this thread would like to also remind readers to make sure they have a functional sense of humor and a brain before they visit any discussion board
Last edited by Mike Licht : July 11th, 2007 at 01:30 PM.
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote
  #2 (permalink)  
Old July 11th, 2007, 01:39 PM
Boost231's Avatar
What's An Intercooler
  
Join Date: May 2001
Location: Tucson,Arizona
Trader Rating: (13)
Posts: 7,369
wow wish i had some extra money around. alot of those parts will go quick. wish i had the cash for the XFI
__________________
Just Another Slow HotAir
www.arizonagn.com
www.gbodyparts.com
www.rjcracing.com
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote
  #3 (permalink)  
Old July 11th, 2007, 01:59 PM
Senior Member
  
Join Date: Jul 2001
Location: Richmond, Tx
Trader Rating: (3)
Posts: 1,739
I will take the Downpipe. Im calling now.
__________________
Chris McDade
87 GN Stock Block, heads, cam, Turbonetics BB 66 S-trim .63 Housing, PTE stock location IC, 3.5" THDP, 2-1/2 hooker exhuast, Built Tranny, Art Carr N/L 9", adj regulator, Double pumper, 72's, BMR lower C arm's, Max effort, GNX Wheels, no times yet.

87 GN (Dad's Car) Build 109 with all the goodies
Update 10/31/08*****10.78@125 Getting there!

87 T 10.44@129.85 1.47 60ft (Sold)
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote
  #4 (permalink)  
Old July 11th, 2007, 02:02 PM
I was here first
  
Join Date: May 2001
Location: ClintonTwp Mi
Trader Rating: (1)
Posts: 2,360
Thanks Chris, downpipe is sold, BTW it just went out in todays UPS
Mike
__________________
www.fullthrottlespeed.com
Tech:www.fullthrottletech.com
Home of the FASTEST hydraulic roller cams for Turbo Buicks
___________________________________________
Disclaimer:
The poster does not take any responsibility for any bad feelings or sense of exclusion that the reader of this post may have-whether real or imagined. Reading threads poses inherent risks. The poster of this thread would like to also remind readers to make sure they have a functional sense of humor and a brain before they visit any discussion board
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote
  #5 (permalink)  
Old July 11th, 2007, 02:06 PM
Senior Member
  
Join Date: Jul 2001
Location: Richmond, Tx
Trader Rating: (3)
Posts: 1,739
Thanks for the quick service!!!!!!!

I've been looking for one of these for over a year!
__________________
Chris McDade
87 GN Stock Block, heads, cam, Turbonetics BB 66 S-trim .63 Housing, PTE stock location IC, 3.5" THDP, 2-1/2 hooker exhuast, Built Tranny, Art Carr N/L 9", adj regulator, Double pumper, 72's, BMR lower C arm's, Max effort, GNX Wheels, no times yet.

87 GN (Dad's Car) Build 109 with all the goodies
Update 10/31/08*****10.78@125 Getting there!

87 T 10.44@129.85 1.47 60ft (Sold)
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote
  #6 (permalink)  
Old July 11th, 2007, 02:17 PM
Senior Member
  
Join Date: Jul 2001
Location: Richmond, Tx
Trader Rating: (3)
Posts: 1,739
Thanks for the quick service!!!!!!!

I've been looking for one of these for over a year!
__________________
Chris McDade
87 GN Stock Block, heads, cam, Turbonetics BB 66 S-trim .63 Housing, PTE stock location IC, 3.5" THDP, 2-1/2 hooker exhuast, Built Tranny, Art Carr N/L 9", adj regulator, Double pumper, 72's, BMR lower C arm's, Max effort, GNX Wheels, no times yet.

87 GN (Dad's Car) Build 109 with all the goodies
Update 10/31/08*****10.78@125 Getting there!

87 T 10.44@129.85 1.47 60ft (Sold)
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote
  #7 (permalink)  
Old July 11th, 2007, 02:35 PM
John Wilde's Avatar
Pray for Kasci Weaver
  
Join Date: May 2001
Location: SF Bay Area, CA
Trader Rating: (1)
Posts: 6,240
Thanks I am trying to put money away for my son's college...
__________________
John Wilde
86 T Type Blue - Driver
86 T Type Black - Resting
87 GN Back Halved - Sold
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote
  #8 (permalink)  
Old July 11th, 2007, 02:37 PM
I was here first
  
Join Date: May 2001
Location: ClintonTwp Mi
Trader Rating: (1)
Posts: 2,360
You have lots of time for that
__________________
www.fullthrottlespeed.com
Tech:www.fullthrottletech.com
Home of the FASTEST hydraulic roller cams for Turbo Buicks
___________________________________________
Disclaimer:
The poster does not take any responsibility for any bad feelings or sense of exclusion that the reader of this post may have-whether real or imagined. Reading threads poses inherent risks. The poster of this thread would like to also remind readers to make sure they have a functional sense of humor and a brain before they visit any discussion board
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote
  #9 (permalink)  
Old July 11th, 2007, 02:47 PM
WINDMILL's Avatar
Senior Member
  
Join Date: May 2001
Location: Sylvania,al
Trader Rating: (5)
Posts: 845
rods
cat rods,are they for stock replacement. tell more on them please
whats the weight on them?
__________________
1987 Grand National
Precision 68-h turbo, 72#inj, 204-214 cam, Champion iron heads & intake, RJC power plate & boost controller & pulley's, Precision hat, 70mm t/b, ATR front mount, turbo 350 trans & art carr 9"converter, 3-1/2" THDP, ATR straight shot, Metco upper's & lowers, ATR sway bar, 9" Moser-33 spline, Aluminum center housing, 3.50 gear,hydroboost brakes
http://s124.photobucket.com/albums/p...t=100_0826.flv
best---------------best
1/8 -------------1/4
60Ft= 1.45---------1.50
1/8= 6.79----------6.84
MPH= 101.---------98.86
1/4----------------10.82
mph---------------123.03
at 21# boost

Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote
  #10 (permalink)  
Old July 11th, 2007, 02:50 PM
I was here first
  
Join Date: May 2001
Location: ClintonTwp Mi
Trader Rating: (1)
Posts: 2,360
Forged Rods, stock size, stock length, bushed for full floating wrist pins, ARP bolts. Great deal for the money, you cannot buy ARP bolts and recon the stock rods for that

Mike
__________________
www.fullthrottlespeed.com
Tech:www.fullthrottletech.com
Home of the FASTEST hydraulic roller cams for Turbo Buicks
___________________________________________
Disclaimer:
The poster does not take any responsibility for any bad feelings or sense of exclusion that the reader of this post may have-whether real or imagined. Reading threads poses inherent risks. The poster of this thread would like to also remind readers to make sure they have a functional sense of humor and a brain before they visit any discussion board
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote
  #11 (permalink)  
Old July 11th, 2007, 03:00 PM
FlyinGN's Avatar
all show no go
  
Join Date: May 2001
Location: Philadelphia
Trader Rating: (0)
Posts: 2,929
mike, do the maf pipes have the intake air temp sensor bungs for the factory sensor ?? Can I get the 3" connector and clamp too?
Do you have any pics of it installed on a car so that I can see how far the pipe extends??
Thanks Frank
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote
  #12 (permalink)  
Old July 11th, 2007, 03:08 PM
I was here first
  
Join Date: May 2001
Location: ClintonTwp Mi
Trader Rating: (1)
Posts: 2,360
you can get a 3" or 4" hose to go on the pipe just let us know when you order it. No bung for the air temp sensor. put it in the filter
Mike
__________________
www.fullthrottlespeed.com
Tech:www.fullthrottletech.com
Home of the FASTEST hydraulic roller cams for Turbo Buicks
___________________________________________
Disclaimer:
The poster does not take any responsibility for any bad feelings or sense of exclusion that the reader of this post may have-whether real or imagined. Reading threads poses inherent risks. The poster of this thread would like to also remind readers to make sure they have a functional sense of humor and a brain before they visit any discussion board
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote
  #13 (permalink)  
Old July 11th, 2007, 06:21 PM
russgoodman's Avatar
Senior Member
  
Join Date: Jul 2006
Location: Lawton, OK
Trader Rating: (2)
Posts: 237
Mike, are the fuel pressure regulators adjustable?? I assume they are, but wanted to make sure before I called. Thanks

Russ Goodman
__________________
87 Turbo T Dark Blue/Blue w/ Chrome Pkg. 63K miles. GT6162E JB, TCS 3200 9x11 L/U, Razor's Alky, TADP, TT chip, 60# inj, RJC PP, LS1 MAF/Trans, Big Mouth Intake, Hydroboost brakes, Russ Merrit Plug Wires

65 Mustang Coupe, 289, C4, 53K miles, all original
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote
  #14 (permalink)  
Old July 11th, 2007, 08:20 PM
BandAid's Avatar
B P U +++
  
Join Date: Oct 2004
Location: Chicago
Trader Rating: (2)
Posts: 2,892
will these 4" MAF pipes work on a TTA...thanks Dennis
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote
  #15 (permalink)  
Old July 12th, 2007, 07:17 AM
SGRIM's Avatar
Owner/Admin TB.com
  
Join Date: Mar 2005
Location: greenville NC
Trader Rating: (2)
Posts: 4,064
Bump for a some great deals!
__________________
1987 GN 47K
1987 GN 26K
1987 T 18K
A few more TR's!



T6P.COM
Big Wood Racing
Where Fast is never Fast enough!

BoostedWhips.com
Super-Motocross.com
TheBassForums.com

NCSHANE.COM
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote
  #16 (permalink)  
Old July 12th, 2007, 07:18 AM
I was here first
  
Join Date: May 2001
Location: ClintonTwp Mi
Trader Rating: (1)
Posts: 2,360
Regulators are billet, and adjustable. Pipes will work on TTA
thanks for the orders so far
Mike
__________________
www.fullthrottlespeed.com
Tech:www.fullthrottletech.com
Home of the FASTEST hydraulic roller cams for Turbo Buicks
___________________________________________
Disclaimer:
The poster does not take any responsibility for any bad feelings or sense of exclusion that the reader of this post may have-whether real or imagined. Reading threads poses inherent risks. The poster of this thread would like to also remind readers to make sure they have a functional sense of humor and a brain before they visit any discussion board
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote
  #17 (permalink)  
Old July 12th, 2007, 09:33 AM
russgoodman's Avatar
Senior Member
  
Join Date: Jul 2006
Location: Lawton, OK
Trader Rating: (2)
Posts: 237
Mike, thanks for the help. Already called and bought one of the fuel press. regs. Thanks again!!!
Russ
__________________
87 Turbo T Dark Blue/Blue w/ Chrome Pkg. 63K miles. GT6162E JB, TCS 3200 9x11 L/U, Razor's Alky, TADP, TT chip, 60# inj, RJC PP, LS1 MAF/Trans, Big Mouth Intake, Hydroboost brakes, Russ Merrit Plug Wires

65 Mustang Coupe, 289, C4, 53K miles, all original
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote
  #18 (permalink)  
Old July 12th, 2007, 09:57 AM
FlyinGN's Avatar
all show no go
  
Join Date: May 2001
Location: Philadelphia
Trader Rating: (0)
Posts: 2,929
sure would love to see one of these pipe installed amd how it fits....
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote
  #19 (permalink)  
Old July 12th, 2007, 11:05 PM
Buick_noob's Avatar
Senior Member
  
Join Date: Aug 2006
Trader Rating: (0)
Posts: 562
Damn I want some rods but wife will kill me...what type of payment do you take paypal??? Any forged pistons for sale?
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote