Go Back   TurboBuick.Com > Vendors Specials and Vendor Customer Service > Advertiser Specials
Reload this Page Injectors, O2 sensors, Fuel pumps & hot wire kit
Register FAQ Members List Photo Gallery Mark Forums Read



Welcome to the TurboBuick.Com forums.

You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features. By joining our free community you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is fast, simple and absolutely free so please, join our community today!

If you have any problems with the registration process or your account login, please contact contact us.
Reply
 
LinkBack Thread Tools Display Modes
  #1 (permalink)  
Old October 7th, 2005, 09:32 AM
I was here first
  
Join Date: May 2001
Location: ClintonTwp Mi
Trader Rating: (1)
Posts: 2,360
Injectors, O2 sensors, Fuel pumps & hot wire kit
Mototron 60LB (65 by some) matched set of 6 $314.94

Seimens 83LB matched set of 6 $329.94

Denso O2 sensors $19.99

Walbro Pump and Hot Wire Kit $129.99

Mike Licht
Full Throttle Speed
586 790 4406
__________________
www.fullthrottlespeed.com
Tech:www.fullthrottletech.com
Home of the FASTEST hydraulic roller cams for Turbo Buicks
___________________________________________
Disclaimer:
The poster does not take any responsibility for any bad feelings or sense of exclusion that the reader of this post may have-whether real or imagined. Reading threads poses inherent risks. The poster of this thread would like to also remind readers to make sure they have a functional sense of humor and a brain before they visit any discussion board
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote
  #2 (permalink)  
Old October 11th, 2005, 05:53 PM
Senior Member
  
Join Date: May 2001
Location: Las Vegas, NV
Trader Rating: (1)
Posts: 1,532
Mike, How much do you get for the Bosch LSU4.2 sensors for the LM-1?
__________________
Scott Atkinson / White 87T 109: Performance Transmissions LV; ALKYCONTROL.com; MAXEFFORT "R"; Full Throttle Speed
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote
  #3 (permalink)  
Old October 12th, 2005, 05:46 PM
Senior Member
  
Join Date: May 2001
Location: IL
Trader Rating: (1)
Posts: 650
Mike give me a price on just the pumps. Need 2

Thanks Sean
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote
  #4 (permalink)  
Old October 12th, 2005, 08:10 PM
Mongoose
  
Join Date: May 2001
Location: new hudson mich.
Trader Rating: (1)
Posts: 461
Smile XP Fuel Pump
Ditto on the fuel pump price break
__________________
Big Mouth,ls1 maf, xltr+,Ta61,PTE s/l inclr,62mm t/b,matched stk plenum,RJC pp,Razor Alky,port int manif,port cyl hds,shim gaskets (8.55:1),port exh manif,Mease 3" d/p,straight shot,msd 50,LC1 O2,KB fpr,volt boost,double pump,stock cam,worked trans,B&m trans clr,9.5" A/C 3000 n/l,HR susp sys,No Hops,boxed uprs & lwrs,bags,trunk braces,bla,bla,bla....
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote
  #5 (permalink)  
Old October 13th, 2005, 08:12 AM
I was here first
  
Join Date: May 2001
Location: ClintonTwp Mi
Trader Rating: (1)
Posts: 2,360
pumps are $99.99 shipped UPS ground in the 48 states, you will need to call the web site will charge shipping
Mike
__________________
www.fullthrottlespeed.com
Tech:www.fullthrottletech.com
Home of the FASTEST hydraulic roller cams for Turbo Buicks
___________________________________________
Disclaimer:
The poster does not take any responsibility for any bad feelings or sense of exclusion that the reader of this post may have-whether real or imagined. Reading threads poses inherent risks. The poster of this thread would like to also remind readers to make sure they have a functional sense of humor and a brain before they visit any discussion board
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote
  #6 (permalink)  
Old October 20th, 2005, 07:59 PM
Lee_Burough's Avatar
..Never Forget..
  
Join Date: May 2002
Location: DFW Area
Trader Rating: (0)
Posts: 2,522
Question
Quote:
Originally Posted by Mike Licht
....Snip....
Walbro Pump and Hot Wire Kit $129.99

Mike Licht
Full Throttle Speed
586 790 4406
Hello Mike, I need a kit to fit a TTA....Have one?

lee burough
__________________
Lee Burough
Lburou@aol.com
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote
  #7 (permalink)  
Old October 20th, 2005, 10:00 PM
Lee_Burough's Avatar
..Never Forget..
  
Join Date: May 2002
Location: DFW Area
Trader Rating: (0)
Posts: 2,522
Thumbs up
Quote:
Originally Posted by Lee_Burough
Hello Mike, I need a kit to fit a TTA....Have one?

lee burough
Mike, I meant to say I need a pump and hot wire kit for a TTA....Have one?

lee
__________________
Lee Burough
Lburou@aol.com
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote
  #8 (permalink)  
Old October 21st, 2005, 08:25 AM
I was here first
  
Join Date: May 2001
Location: ClintonTwp Mi
Trader Rating: (1)
Posts: 2,360
We do not have a dedicated TTA kit but we have used Regal ones in the past. We have a pump same price
Mike
__________________
www.fullthrottlespeed.com
Tech:www.fullthrottletech.com
Home of the FASTEST hydraulic roller cams for Turbo Buicks
___________________________________________
Disclaimer:
The poster does not take any responsibility for any bad feelings or sense of exclusion that the reader of this post may have-whether real or imagined. Reading threads poses inherent risks. The poster of this thread would like to also remind readers to make sure they have a functional sense of humor and a brain before they visit any discussion board
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote
  #9 (permalink)  
Old October 21st, 2005, 09:52 AM
Lee_Burough's Avatar
..Never Forget..
  
Join Date: May 2002
Location: DFW Area
Trader Rating: (0)
Posts: 2,522
Thumbs up
Quote:
Originally Posted by Mike Licht
We do not have a dedicated TTA kit but we have used Regal ones in the past. We have a pump same price
Mike
Ordered pump and wire kit....Does the pump need anything special to fit in the TTA tank? How much pressure & flow (compared to the W340M) does this pump produce? Looks like the cats meow

The person who took the order is SHARP!

Thanks for a great deal

lee
__________________
Lee Burough
Lburou@aol.com
Last edited by Lee_Burough : October 21st, 2005 at 09:55 AM.
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote
  #10 (permalink)  
Old October 21st, 2005, 10:03 AM
I was here first
  
Join Date: May 2001
Location: ClintonTwp Mi
Trader Rating: (1)
Posts: 2,360
The sharp person is Marianne (my lovely wife) she said thanks. The pump is the same as the old 340M pump>let us jknow if you have question or need help
Mike
__________________
www.fullthrottlespeed.com
Tech:www.fullthrottletech.com
Home of the FASTEST hydraulic roller cams for Turbo Buicks
___________________________________________
Disclaimer:
The poster does not take any responsibility for any bad feelings or sense of exclusion that the reader of this post may have-whether real or imagined. Reading threads poses inherent risks. The poster of this thread would like to also remind readers to make sure they have a functional sense of humor and a brain before they visit any discussion board
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote
  #11 (permalink)  
Old October 28th, 2005, 04:47 PM
Senior Member
  
Join Date: Feb 2004
Trader Rating: (0)
Posts: 160
Mike, any chance of the base translator going on sale any time soon? My MAF just took a dump and I wasn't planning on putting the car away for another few weeks.
__________________
'87 Turbo-T

My Cardomain site.

My reality check bounced
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote
  #12 (permalink)  
Old November 3rd, 2005, 11:42 AM
Senior Member
  
Join Date: May 2004
Location: pittsburgh, pa.
Trader Rating: (0)
Posts: 158
Mototron 60lb. highz injectors
Quote:
Originally Posted by Mike Licht
Mototron 60LB (65 by some) matched set of 6 $314.94

Seimens 83LB matched set of 6 $329.94

Denso O2 sensors $19.99

Walbro Pump and Hot Wire Kit $129.99

Mike Licht
Full Throttle Speed
586 790 4406
Hi Mike....I wanted to order a matched set of the mototron 60/65lb. HIGHZ injectors but could not because you guy's are at SEMA. I also need my extender chip updated so I will call you, next week I guess, to nail it all down. Have a good time at the show!

Thanks,

Larry
__________________
87 GN--Orig. owner & paint, 53K. +.30 Weber prep'd shortblock, 206/206 FT, SM 62mm TB/plenum, 60 lb. hi-z's, PT 6152e, CAS V4, TinMan CAI, T-Plus w/3.5" maf and Extender chip, SMC Alky, 3" THDP w/dump & elec. cutout, KB s/s 2 1/2" exhaust w/Ultra flows. Janis billet trans. & a TCS 9/11 3400 converter; etc., etc.
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote
  #13 (permalink)  
Old November 9th, 2005, 02:01 PM
Senior Member
  
Join Date: Apr 2004
Location: Long Island, NY
Trader Rating: (1)
Posts: 1,106
Mike,

I would like to get another Extender Chip for my new setup or have this one updated. Should I get the extreme or do I have enough room to still run the Extender? Unfortunately, I over wrote the Turbolink log I had last night at 18-20 psi, but I believe I saw the MAF readings in the 400s.

Thanks.
__________________
87 GN bought 6/10/04
Grooms Lvl 3 Short .040, H210/205, PT6152E, VPE Stage 3 Heads/I, 3K 9/12 TC, Extender(19/17), THDP, 65lb Inj, FMIC, ATR 3" Dual Crossflow, Kirban front/seat braces, Bilsteins, UMI UCA/LCA, Trans/LT1, Big Mouth CAI, RJC Boost Cont., Custom Servo, PTS shift kit, RJC DSOP, DS poly Mount.

SOLD - 1/26/2007
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote
  #14 (permalink)  
Old November 9th, 2005, 02:07 PM
I was here first
  
Join Date: May 2001
Location: ClintonTwp Mi
Trader Rating: (1)
Posts: 2,360
To go from 400 to 512 is a big step we can do an extreme buut you will have to upgrade to a 3.5" sensor
Mike
__________________
www.fullthrottlespeed.com
Tech:www.fullthrottletech.com
Home of the FASTEST hydraulic roller cams for Turbo Buicks
___________________________________________
Disclaimer:
The poster does not take any responsibility for any bad feelings or sense of exclusion that the reader of this post may have-whether real or imagined. Reading threads poses inherent risks. The poster of this thread would like to also remind readers to make sure they have a functional sense of humor and a brain before they visit any discussion board
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote
  #15 (permalink)  
Old November 9th, 2005, 02:15 PM
Senior Member
  
Join Date: Apr 2004
Location: Long Island, NY
Trader Rating: (1)
Posts: 1,106
Quote:
Originally Posted by Mike Licht
To go from 400 to 512 is a big step we can do an extreme buut you will have to upgrade to a 3.5" sensor
Mike
Fair enough. I will order another Extender from you. I will send you an email with all of my specs and just contact me when you need the CC number.

Marc
__________________
87 GN bought 6/10/04
Grooms Lvl 3 Short .040, H210/205, PT6152E, VPE Stage 3 Heads/I, 3K 9/12 TC, Extender(19/17), THDP, 65lb Inj, FMIC, ATR 3" Dual Crossflow, Kirban front/seat braces, Bilsteins, UMI UCA/LCA, Trans/LT1, Big Mouth CAI, RJC Boost Cont., Custom Servo, PTS shift kit, RJC DSOP, DS poly Mount.

SOLD - 1/26/2007
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote
  #16 (permalink)  
Old November 18th, 2005, 03:33 PM
I'm addicted
  
Join Date: May 2003
Location: New Jersey
Trader Rating: (0)
Posts: 339
Quote:
Originally Posted by Mike Licht
Mototron 60LB (65 by some) matched set of 6 $314.94
Mike Licht
Full Throttle Speed
586 790 4406
This deal still available?
__________________
MAGNA

'86 Grand National with a bunch of crap everyone else has....and some that nobody else has
'99 GTP...not quite stock.
Pics of the GN
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote
  #17 (permalink)  
Old November 18th, 2005, 03:56 PM
I was here first
  
Join Date: May 2001
Location: ClintonTwp Mi
Trader Rating: (1)
Posts: 2,360
Sure call us
Mike
__________________
www.fullthrottlespeed.com
Tech:www.fullthrottletech.com
Home of the FASTEST hydraulic roller cams for Turbo Buicks
___________________________________________
Disclaimer:
The poster does not take any responsibility for any bad feelings or sense of exclusion that the reader of this post may have-whether real or imagined. Reading threads poses inherent risks. The poster of this thread would like to also remind readers to make sure they have a functional sense of humor and a brain before they visit any discussion board
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote
  #18 (permalink)  
Old November 19th, 2005, 08:53 PM
Senior Member
  
Join Date: Apr 2004
Location: Long Island, NY
Trader Rating: (1)
Posts: 1,106
Quote:
Originally Posted by Mike Licht
To go from 400 to 512 is a big step we can do an extreme buut you will have to upgrade to a 3.5" sensor
Mike
It was about 37 degrees and I saw 502 for MAF readings on Turbolink tonight. In this cold air, I have been hitting high 400s consistently. Any chance, translator plus on sale?
__________________
87 GN bought 6/10/04
Grooms Lvl 3 Short .040, H210/205, PT6152E, VPE Stage 3 Heads/I, 3K 9/12 TC, Extender(19/17), THDP, 65lb Inj, FMIC, ATR 3" Dual Crossflow, Kirban front/seat braces, Bilsteins, UMI UCA/LCA, Trans/LT1, Big Mouth CAI, RJC Boost Cont., Custom Servo, PTS shift kit, RJC DSOP, DS poly Mount.

SOLD - 1/26/2007
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote
  #19 (permalink)  
Old November 20th, 2005, 06:13 PM
Senior Member
  
Join Date: Sep 2001
Location: Wildomar,Ca.
Trader Rating: (1)
Posts: 1,080
Mike,
Do you have any specials on Seimens 96# injectors? I would need two sets.
Thanks,
Jeff
__________________
87 GN race car
9.49@145mph. Best speed 148mph
5.95@115mph 1/8th
1.36 best sixty foot brake
TA block and heads 265 cu.",4276 turbo,400 trans.
'86 GN project car
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote
  #20 (permalink)