Go Back   TurboBuick.Com > Vendors Specials and Vendor Customer Service > Advertiser Specials
Reload this Page Summer Specials
Register FAQ Members List Photo Gallery Mark Forums Read



Welcome to the TurboBuick.Com forums.

You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features. By joining our free community you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is fast, simple and absolutely free so please, join our community today!

If you have any problems with the registration process or your account login, please contact contact us.
Reply
Page 1 of 2 1 2 >
 
LinkBack Thread Tools Display Modes
  #1 (permalink)  
Old March 8th, 2005, 02:30 PM
I was here first
  
Join Date: May 2001
Location: ClintonTwp Mi
Trader Rating: (1)
Posts: 2,360
Summer Specials
We are back from vacation! Here are some specials based on your feedback:

Mototron 60LB (65lb by some vendors) HIGH - Z injectors, no ECM mods needed $399.99 INCLUDING Your choice of a COMMANDER, EXTENDER or EXTREME chip. This is a $479.99 value a savings of $80

Your choice of 72 or 83 lb injectors $54.99 each

Scanmaster 2.1 $219.99

CLOSEOUT - GM O2 sensors $19.99 while they last when they are gone they are gone

Harland Sharp Roller Rockers complete set $369.99 your choice of ratio 1.55, 1.6, 1.65 We have 1 set each of 1.60 and 1.65 in stock 4 - 6 week delivery on the rest.

Rail mounted fuel pressure gauge nice liquid filled unit made in USA with rail adaptor black body with black face $34.99

MAF Translator $159.99
MAF Translator plus (with timing control) $229.99
YOUR CHOICE OF NEW GM MAF SENSOR (the ones we stock) $110 with translator purchase

Commander, Extender, or Extreme chip custom to your car $99.99

Orange Stripe street brawler torque converter 3000 stall $289.99

PTE stock location intercooler $744.99
PTE front mount inercooler $839.99

Walbro Intank fuel pump with intall kit $89.99

Custom embroidered floor mats Black with GM logo or GM grey with T-Type logo $74.99


I will have a few more items to post next week, If there is something special you want speak up we will take a look. we will run this until the 20th. This will be the last sale until the nats!
Call to place orders no web orders at these prices.

Mike Licht
586 790 4406
586 790 4409 fax
__________________
www.fullthrottlespeed.com
Tech:www.fullthrottletech.com
Home of the FASTEST hydraulic roller cams for Turbo Buicks
___________________________________________
Disclaimer:
The poster does not take any responsibility for any bad feelings or sense of exclusion that the reader of this post may have-whether real or imagined. Reading threads poses inherent risks. The poster of this thread would like to also remind readers to make sure they have a functional sense of humor and a brain before they visit any discussion board
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote
  #2 (permalink)  
Old March 8th, 2005, 09:58 PM
boost86's Avatar
Senior Member
  
Join Date: May 2004
Location: Indiana
Trader Rating: (0)
Posts: 470
any specials on some 50# injectors???
__________________
"Life is racing, Everything else is just waiting" Steve McQueen
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote
  #3 (permalink)  
Old March 8th, 2005, 11:22 PM
ross87t's Avatar
Senior Member
  
Join Date: May 2001
Location: Alvin/Houston, TX.
Trader Rating: (0)
Posts: 1,407
Any specials on 60's and a reburn/update for my current extender?

Also, could you take a look at this thread and possibly throw some advice my way? I am stumped.
Low BLMs at idle and cruise
__________________
87 Buick Turbo Regal: Pearl white, T63e, 3400 billet 9/11, 60's, SMC alky, T+, Extender Extreme, THDP, etc.(sold)

2006 Dodge Ram Hemi Quad Cab
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote
  #4 (permalink)  
Old March 9th, 2005, 09:52 AM
I was here first
  
Join Date: May 2001
Location: ClintonTwp Mi
Trader Rating: (1)
Posts: 2,360
Quote:
Originally posted by boost86
any specials on some 50# injectors???
IMO the 60's are a much better injector. We do not currently even sel the 50's I really don't see a reason.
Mike
__________________
www.fullthrottlespeed.com
Tech:www.fullthrottletech.com
Home of the FASTEST hydraulic roller cams for Turbo Buicks
___________________________________________
Disclaimer:
The poster does not take any responsibility for any bad feelings or sense of exclusion that the reader of this post may have-whether real or imagined. Reading threads poses inherent risks. The poster of this thread would like to also remind readers to make sure they have a functional sense of humor and a brain before they visit any discussion board
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote
  #5 (permalink)  
Old March 9th, 2005, 09:56 AM
I was here first
  
Join Date: May 2001
Location: ClintonTwp Mi
Trader Rating: (1)
Posts: 2,360
Quote:
Originally posted by ross87t
Any specials on 60's and a reburn/update for my current extender?

Also, could you take a look at this thread and possibly throw some advice my way? I am stumped.
Low BLMs at idle and cruise

Give me a call we can work something out
Mike
__________________
www.fullthrottlespeed.com
Tech:www.fullthrottletech.com
Home of the FASTEST hydraulic roller cams for Turbo Buicks
___________________________________________
Disclaimer:
The poster does not take any responsibility for any bad feelings or sense of exclusion that the reader of this post may have-whether real or imagined. Reading threads poses inherent risks. The poster of this thread would like to also remind readers to make sure they have a functional sense of humor and a brain before they visit any discussion board
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote
  #6 (permalink)  
Old March 9th, 2005, 05:07 PM
esinger's Avatar
Senior Member
  
Join Date: May 2004
Location: Greensboro, NC
Trader Rating: (1)
Posts: 630
Rail Mounted Fuel Pressure Gauge
Hi Mike
I saw your special on the rail mounted fuel pressure gauge and want to know if you have them in stock and ready to ship.

Thanks
__________________
Eric Singer
"Thanks for checking my taillights"
-------------
1987 VW Scirocco 16V - Stock
1985 Grand National - No Radiator attached to MY intake
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote
  #7 (permalink)  
Old March 9th, 2005, 06:52 PM
Member
  
Join Date: Jul 2002
Location: new jersey
Trader Rating: (0)
Posts: 78
mike,
can you work me up a package price for the following items
jersey downpipe,o2 sensor,fuel pressure gage, and 2 3/4 cat back exhaust system with the mufflers you sell shipped to 08054. also let me know what items are in stock or not. you can email me hwd25@aol.com thanks! herb.
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote
  #8 (permalink)  
Old March 9th, 2005, 10:43 PM
Member
  
Join Date: Oct 2003
Location: Tampa, Fl
Trader Rating: (0)
Posts: 84
Can you work me up a package price for the poly mounts for stock block, poly trans mount for th400 and for some 1.6 roller rockers.
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote
  #9 (permalink)  
Old March 12th, 2005, 02:33 AM
Senior Member
  
Join Date: Jun 2001
Location: Phoenix AZ
Trader Rating: (2)
Posts: 648
Hey Mike,

Any specials on TH downpipes?

Thanks!
__________________
RICK ELAM
1987 TURBO-T (completly apart)
1987 Limited (stock..needs to be taken apart)
1989 Turbo TA (just back together) 12.0 at 124... 60ft is overrated...
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote
  #10 (permalink)  
Old March 13th, 2005, 06:37 PM
MENBER SINCE 2OOI
  
Join Date: Oct 2001
Location: OHIO
Trader Rating: (0)
Posts: 291
FLOOR MATS
HI MIKE, DO YOU HAVE, OR CAN YOU GET FLOR MATS IN MAROON/RED WITH THE TURBO-6. LOGO?? IF SO I WILL BUY THEM. THANK YOU. FRANK.
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote
  #11 (permalink)  
Old March 14th, 2005, 12:11 AM
Mike70gtx's Avatar
Senior Member
  
Join Date: May 2001
Location: Texarkana, Texas
Trader Rating: (0)
Posts: 1,061
what about a cat back exhaust with no mufflers?
__________________
1984 Grand National 12.8 1/4 mile (sold)
1987 Grand National strong rebuild,steel mains, forged pistons, pt-67, jet hot headers & 3" thdp, 60#high-z injectors, translator-plus with ext.chip, dual nozzle SMC alky, built trans with trans brake, Art Carr 9 1/2 3500 stall, eaton posi, 30 spline moser axles, LPW girdle, cas v2 fm, iron heads with 5 angle and porting, RJC pulleys, Q-boost, 4" cold air with maf, 3" atr ss dual exhaust with ultra flo's. 11.29 at 122mph on pump gas and alky, through muffs. Room left to tune.
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote
  #12 (permalink)  
Old March 15th, 2005, 12:01 AM
POWERED BY POVERTY
  
Join Date: Mar 2004
Location: MINNESOTA
Trader Rating: (0)
Posts: 492
Question CHIPS
WHAT ARE THE DIFFERENCES IN THE 3 CHIPS YOU ARE OFFERING?

GOING TO CHANGE FROM 009'S ALSO GETTING A PT61.

NEW TO THE TURBO BUICKS AND APPRECIATE ANY INFO.

WILL PROBABLY ORDER INJ/CHIP SET-UP.

THANKS, STEVE

ACEMCGUIRE@MSN.COM
__________________
87' GN- 109 .030 OVER,CENTER BILLET MAIN CAPS,TRW FORGED PISTONS,PLASMA MOLY RINGS,ARP STUDS,204/214 CAM,HARLAND SHARP 1.65 ROCKERS,PORTED BIG VALVE HEADS,PORTED STOCK LOWER,62 MM T.B, MEASE SHEETMETAL UPPER,LARGE FRONT MOUNT,KENNE BELL HEADERS,3" THDP,ADJUSTABLE H.D WASTEGATE,MSD DIS4,60 LB INJ, TURBOTWEAK CHIP,MAF TRANSLATOR,H.V FRONT COVER, PT-61 TURBO

12.12@117mph(2.3 60')

200R4 , STAGERITE BRAKE,VIGILANTE L.U. 3200 STALL, BUILT BY PERFORMANCE TRANS.
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote
  #13 (permalink)  
Old March 15th, 2005, 09:30 PM
PaCemkr86's Avatar
WFO Racing
  
Join Date: Jan 2005
Location: Odem,Texas
Trader Rating: (1)
Posts: 3,884
i tried calling, no answer.. went ahead and ordered my extreme extender chip on the web site..

PS nice site BTW
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote
  #14 (permalink)  
Old March 15th, 2005, 09:44 PM
highboost's Avatar
Senior Member
  
Join Date: Apr 2004
Location: wichita
Trader Rating: (0)
Posts: 366
any specials on cams????

and is it the walbro 340 pump on sale for $89.

thanks keith
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote
  #15 (permalink)  
Old March 16th, 2005, 11:53 AM
Senior Member
  
Join Date: May 2004
Location: Shamokin, PA
Trader Rating: (0)
Posts: 227
What kind of price can you do for a set of Champion irons and the Chmpion intake? And maybe a V4?
__________________
Scott in PA
87 Turbo-T, PTE-51, PTE V4, 42LB, Turbotweak, ,Hot wired 340, 62mm TB, RJC plate, Champion iron heads and ported intake, Alky Control, Accufab, BGC ported neck/3” DP/ exhaust, Power Performance Ultimate Front End kit, PST control arm bushings, HRParts LCA, UMI UCA, Rebuilt rear, Moog Springs, KYB’s, ATR rear bar, 36mm front bar, Scanmaster II, Cyberdyne dash, T-Link, Powdercoated frame, rear and suspension.
http://www.flickr.com/photos/urhstry/
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote
  #16 (permalink)  
Old March 16th, 2005, 12:30 PM
I was here first
  
Join Date: May 2001
Location: ClintonTwp Mi
Trader Rating: (1)
Posts: 2,360
Terry houston pipes - Call

Innovate A/F meters - Call

We are not selling any Catbacks at this time

Special request pricing needs to call me.
We just added two more phone lines and a new phone system the guys are still here right now finishing it up (march 16) after that you should no problem getting through.

Mike Licht
__________________
www.fullthrottlespeed.com
Tech:www.fullthrottletech.com
Home of the FASTEST hydraulic roller cams for Turbo Buicks
___________________________________________
Disclaimer:
The poster does not take any responsibility for any bad feelings or sense of exclusion that the reader of this post may have-whether real or imagined. Reading threads poses inherent risks. The poster of this thread would like to also remind readers to make sure they have a functional sense of humor and a brain before they visit any discussion board
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote
  #17 (permalink)  
Old March 16th, 2005, 02:09 PM
I was here first
  
Join Date: May 2001
Location: ClintonTwp Mi
Trader Rating: (1)
Posts: 2,360
Quote:
Originally posted by highboost
any specials on cams????

and is it the walbro 340 pump on sale for $89.

thanks keith
340 is a Mustang pump. Walbro used to machine these down to produce a 340M (machined) that would fit a GM hangar. They got tired of that and created another pump with the correct plastic bottom for the GM hangar F20000169. It is exactly the ame unit in performance it just fits the car without the need for the machining that Walbro used to do.
Mike
__________________
www.fullthrottlespeed.com
Tech:www.fullthrottletech.com
Home of the FASTEST hydraulic roller cams for Turbo Buicks
___________________________________________
Disclaimer:
The poster does not take any responsibility for any bad feelings or sense of exclusion that the reader of this post may have-whether real or imagined. Reading threads poses inherent risks. The poster of this thread would like to also remind readers to make sure they have a functional sense of humor and a brain before they visit any discussion board
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote
  #18 (permalink)  
Old March 16th, 2005, 02:24 PM
Senior Member
  
Join Date: Jan 2005
Location: Huntsville, AL
Trader Rating: (0)
Posts: 466
do you have the impala ss 3" MAF in stock?
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote
  #19 (permalink)  
Old March 17th, 2005, 09:43 AM
I was here first
  
Join Date: May 2001
Location: ClintonTwp Mi
Trader Rating: (1)
Posts: 2,360
Yes we do
Mike
__________________
www.fullthrottlespeed.com
Tech:www.fullthrottletech.com
Home of the FASTEST hydraulic roller cams for Turbo Buicks
___________________________________________
Disclaimer:
The poster does not take any responsibility for any bad feelings or sense of exclusion that the reader of this post may have-whether real or imagined. Reading threads poses inherent risks. The poster of this thread would like to also remind readers to make sure they have a functional sense of humor and a brain before they visit any discussion board
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote
  #20 (permalink)  
Old March 19th, 2005, 10:15 PM
Senior Member
  
Join Date: Jan 2003
Location: Columbus, Ohio
Trader Rating: (1)
Posts: 381
I'd like to place an order, but I'm guessing you'll be closed tomorrow (Sunday, March 20). Can I call in my order on Monday the 21st?

Thanks
__________________
4 Door
84 Regal Limited
3.8 turbo drivetrain
"It's all stock,...yeah right"

1987 Blazer
Stock LC2 power


My Buick Page
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote
  #21 (permalink)  
Old March 21st, 2005, 09:54 AM
I was here first
  
Join Date: May 2001
Location: ClintonTwp Mi
Trader Rating: (1)
Posts: 2,360