Current setup!
.030 over J&E's, PTE cam 218+, Ported large valve TTA heads, port matched intake, Arp studded bottom end, arp rod cap bolts, CPT 65BB with an .82 housing, ATR 3in. dp with external gate, pat's 12" D5 l/u (haven't checked the stall), MSD50's, Accufab billet afpr, Extender and trans +.
I think the cam is too large for a .030 over 231 some may disagree, also there is a not so healthy rap coming from the lifter valley and if I were to pull the intake to see if the lifters or lifter is hung up, I would prolly change the cam. It was the quietest running 3.8 I've ever heard before this whole high BLM thing happened
(see thread)
Pegged BLM's
Since then it has been noiser than a 2 year old in the kitchen playing with pots and pans! So what cam to choose, I'm interested in a flat or roller make some suggestions.......
210-214 roller someone mentioned before has peaked my interest.