Quote:
Originally posted by GARY HARVEY
I've ordered TAs Modification Plate to retain my cam. What else will I be having to deal with using Mr. Duttweilers oiling system? The RollMaster fits, the cover has been cut .120 to line things up and I also need to find the crank trigger sensor that fits the BHJ balancer (who is a vendor) and is this a straight forward install sans suprises?
Anyone need a gear drive setup with the sideoiler including mounting bracket?
I have both Emco and Miladon sets. Emco set is Cryo'd and Coated (not the idler) I also have a new Comp Cam for this setup w/ the snout removed.
This stuff needs to travel in one box BTW.
I'm Learnin'
Gary
|
I've been told on many occasions that I'll have to cut .120 off the front cover so that everything will line up on my on center block.
BUT, while looking at a new cover here in the garage, and using a caliper set to .120, it looks VERY much like cutting that much off will pretty much come withing just a thou or two (possibly penetrate) the rear most oil pump mounting bolt hole???
__________________
TurboDave EWCS(SW) USN (Ret.)
My Photo Gallery
Email Us
Sevierville, TN
TranslatorPro MAFless fuel, spark and boost management
86 GN(TranslatorPro/ExtenderPro on speed density w/boost & fuel pump control,PLX-WB) (original owner)
87 GN (second owner)
84 L69 Z28 (original owner)
01 Excursion LTD 7.3L PSD(Power Stroke Diesel), Turbo, 4X2
08 Honda Accord EX-L, 3.5V6, AT