|
Your problem has nothing to do with the alky system.
Cam Sensor...There is a phillips screw that holds the reluctor wheel. I would take the screw off and lift the reluctor. Underneath it is a little tab that sets it into place. It is common for the tab to break and throw off all timing.
Make sure that tab is there.
Also.. if you messed with the chip, make sure the chip is properly seated in the ecm.
Also try reseting the ecm by unplugging the connector by the battery and replugging it in.
If you messed with the ecm, make sure both plugs are seated down into their sockets.
reply back..
|