Thanks, the heads are new from champion bigger valves and ported, I used a new set of unmolsted heads and had them done the heads that where on the car where also done by champion, had a crack in #6 exhaust valve seat and found it cheaper to have a new set done instead of fixing the old one's hey had already been worked on a few times before.
the motor is a fresh build ,the first time I lost a head gasket it meltted a piston a hurt the block beyond repair!!
so started with a fresh block and new heads and still have the same problem.
have a felling that after a while you just need to step a way and move to a new project , and that's what i have done for now.
with the house being remodeled and a new baby on the way not a lot of time for race stuff!!!
thanks JD
__________________
TAI winner 06, runner up 07, winner 08
SOLD!! 86 GN(GNX clone) 67 tubo,ALKYCONTROL,M/T D/R, 50's, RJC P/P,9/11 3400 con.,T/Tchip,NEW 11.66@116mph
NEW!! 86 GN (the new GNX) te45a,Precission F/M, Fast bank to bank,Don Cruz BUILT MOTOR,ATR billited roller cam,55lb inj.,Mike DeMarco LEVEL10 Tranny,9/11 3000 con.,ALKYCONTROL, New best 10.85@125mph!!!!
89 TTA 1092, 67 turbo,ALKYCONTROL,M/T D/R, 65's, RJC P/P,9/11 3500 con.,T/T chip,NEW BEST!! 10.85@124mph WOW!!!!
86 GN stock 175,000,basic's,13.20@100mph
|