View Single Post
  #8 (permalink)  
Old June 25th, 2008, 06:11 AM
ryan george ryan george is offline
Senior Member
 
Join Date: Jan 2007
Trader Rating: (1)
Posts: 173
Quote:
Originally Posted by Blazer406 View Post
What chip?

Any datalog of it when it was trying to stall?

I'd say that was a solid run for a first run in a long time....1.73 60' ain't too bad... what launch boost? you didn't mention any head mods.... a little more 60' work.... and 25 psi should go mid to even low 11's with your combo... and tuning..... so IMHO... 11 anything is a good solid number for first time out.... Great job!
Running a TT chip. I'm not sure how to tell that, if you could tell me, I'll check (if the powerlogger captures this data). I sucked at the 60' on the first few runs and figured out I was spinning. Backed down to about 2 pounds of boost (from about 5) and it launched good. no head mods. Thanks, much appreciated, I need the feedback. O2 millivolts were in the 730-740 range in 3rd gear. No knock at all. Are those numbers too low? Thanks again for the questions. I had hoped for a little better numbers then I got. I'm new to tuning and trying to figure this out mostly on my own.
Reply With Quote