Quote:
Originally Posted by DorianL
Update.
I set the clearance of the direct clutches to 0.034 I don't know what they were a before - I din't bother measuring. The travel was massive. Fortunately I had some steels left over from another trans. I bright it down from what looked like a quarter inch to the above. Phew!!!
|
Dorian, my ATSG manual says (Direct clutch pack clearance should be .010" per lined clutch plate). Don't know if this is what the Pro builders on here recommend.
Found it in the Strengthening 2004R section. ( .038"-.042" end play)