|
I cannot give tech on the Caspers harness. Thats theirs.
You have a plug on the car behind the coolant tank.. the factory one. That one has the correct orientation. You can use that as a reference.
Wiring issues are one thing. Wiring issues on a 20 year old car are another. Wiring issues on a 20 year old modified ar with afermarket "stuff".. there you go.
You may have a bad 3 bar sensor.. but before you can assumme this.. you have to make sure the wires on the plug are in fact oriented in the correct location. And that the sensor is a 3 bar.
If you have a stock GN laying around.. plug the 3 bar into it.. and measure the center wire on the 3 prong plug=green wire=1.6 key on.
HTH
__________________
89 TTA Stock appearing 
10.550 at 132.22 1.539 60ft 3850 race weight w/driver
Always on 93 octane
www.alkycontrol.com
727-570-9999
|