B&M Quicksilver Ratchet shifter Model #80683. I modified the tranny tunnel and mounted it in the stock shifter housing of my 82 Datsun 280ZXT. The window will read wrong, but I'm not using that anyway (since the picture was taken, I've made a brushed stainless plate to cover the openings on the stock housing). I have already mounted and used the shifter successfully and for the indicator, I'm using the Dakota Digital single digit readout mounted on my dash...works well (showing the red P between the speedometer and tach). 4 speeds and the indicator reads correctly PRN12D0. The attached pictures were taken before I finished putting the interior back together, so excuse the messes.
BTW, it behaves VERY WELL...a far cry from a stock 3 speed automatic. Just have to remember to downshift it manually when I come to a stoplight...those OD starts are slooooooooow. Now if I can get the damn thing to quit puking tranny fluid...either coming from the pan gasket or the vent, because everything else is bone dry.
Hope it helps.
Warren