[Bent6]

Here is my setup. I had Ricks Hot Rods build me one of their stainless tanks with a custom -10 pickup but you could easily modify the stock sending unit in the same manner.

-10 stock style pickup to externally mounted Weldon 2015 mounted above tank in location where stock muffler originally resided. Yes - this pump can lift the fuel just fine and is perfectly streetable. 40 micron pre-filter and 10 micron post filter. -08 line to the rails with a -06 return line. I run an Aeromotive pump controller to keep the noise down on the street and to help keep the fuel cool.