Quote:
Originally Posted by nuclearxp
How much pre-tension do you put on the actuator? I screwed it in until the tip of the hole in the rod just barely made it to the flapper fitting. It took a decent amount of pulling to get it on.
|
if you had to pull it, its probably good enough. 
__________________
11.255 at 121.5 (best mph:124.1)
87 GN, PT61, mototron 60#s .030 over, TRW pistons, ported and polished iron heads, with Manley 1.77, 1.50 valves, ported intake, 204/214, ATR headers, 2.5" exhaust, 3" ATR DP ,ebay fmic, moser axles, LT1 MAF, fuel mods, home built billet tranny and a 3400 CK 10.5. air bags and umi lowers CAs ATR rear sway bar, PAC alky kit, 1LE 36mm front sway bar, QA1 economy coil overs, Howe longer ball joints,bilsteins, Richmond 3.23s, eaton posi, ls1 brakes.
Dads 86 GN-ported heads, 204/214, ATR headers/exhaust, PT61, 60s, alky, 3400 9/11, ebay front mount (supporting mods...) 11.5 at 124.1 mph 24 psi.
modded 85 GN and now a new 87 T.
|