|
Guessing mid 11's on 20 psi... and good air... and a good 60' time.... this is assuming you have enough tires to net good enough traction for sub 1.60 60' times.... if your 60' time slips back near a 2.0.... you might only go low 12's...
The turbo is capable of mid 10's... but at higher boost and more complementing mods...
__________________
1987 GN
Currently under construction....
Old Parts: 60# injectors, 3" TH DP with test pipe and hooker cat back, Walbro 340 pump, Razor's Alky, TT Chip, 3-1/2" MAF pipe with Big Mouth CA Kit and LS1 MAF, Translator.... yada yada
New parts: Ported heads with stainless valves, RJC FMIC, T&D 1.65 roller rockers, Comp Custom Ground Hydraulic Roller 218/218@.050 .590/.573 (with 1.65 rockers), champion ported intake, Hemco stock appearing doghouse, PT70 P-trim turbo with H comp. housing, N/A109 block bored .030 over with head studs, main studs #2 and #3 billet main caps, cometics, TRW forged .030 over slugs with hastings moly rings.
New times soon.
(1/8) 8.002 @ 86 mph 12.650 @ 106 mph with a 1.71 60' time with the stock turbo/dutt neck intercooler (best mph was 107.69 mph)
|