Quote:
Originally Posted by 49-blues
In your video with the stock bulbs when you make a right turn both sections of bulbs flash, why is it that when you make a left turn with the leds , only the outside section of bulbs flash- i thought both sections should flash sequentially?
|
Nope! With the factory lights when you have any turn signal on and you hit the brakes, The side that your turn signal is on you won't have any brake lights!!  So this way with the LED's you will have that inner section "A Brake light" and the outside section is the turn signal. This way you always have a brake light on the same side as the turn signal.
I thought that is one spot that needed improvement over the 20yr old set up.
Or before they go into production (which is Very soon) maybe I can see if it could be done that way or not.
Anyone intrested in or have questions on these Tailights feel free to call me at (865) 680-4008.
Scot W.
__________________
Digital LED Tail lights
1986 T-Type GNXRay (X-ray clone)
White W/black out trim, Grey leather int., LED taillights from InjectionX, 55lb injectors, Carrilo Rods, JE forged pistons, G-body parts S.L.I.C, 9.5" (Dusty Bradford) PTC N/LU conv, H&R engine Mounts, Trans re-worked by Todd Lyle, Walbro 340m, Hot wire kit, RJC powerplate, 3" TH down pipe, ATR 3" Stainless Steel dual exhaust, 4-Adjustable drag shocks, Southside uppers, ATR boxed lowers, Driveshaft loop, powdercoated & polished GTA rims..
1986 GN - 6.76 @ 103.8 1/8th - SOLD
1987 WE4 - SOLD
|