View Single Post
  #18 (permalink)  
Old September 28th, 2007, 06:06 PM
GN84Turbo's Avatar
GN84Turbo GN84Turbo is offline
Where'd all my money go?
 
Join Date: May 2001
Location: Arcadia, California
Trader Rating: (0)
Posts: 184
got the part #s

OK finally took the time to figure this out, turns out kragen has a v-belt measuring tool, which is great.

ok part #s:

alternator/water pump: 15456 (or 15450)

Power steering belt: 15371


The 15 is the belt width/thickness and the remaining #s represent the length. These are universal part #s but i picked up Goodyear Gatorbacks brand at Kragen for ~11 bucks a piece.

15456 tightens up at the very top of the alternator bracket. If you want a shorter belt, 15450 will fit perfectly as well.

The power steering belt fit very well (or as well as the original did, i can never get the belt very tight on the PS), but you could go one size smaller (15365 or something) and have no problems.

Hope this helps,
__________________
Terry Topits
84 GN - Original Owner; purchased off of the showroom floor in early '85.

Modifications listed at:
http://www.turbopower.co.nr/
Reply With Quote