Quote:
Originally Posted by V6Power87
Where do you add the couple of bolts Bill?
|
I'm guessing between those two bolt holes you see in the pic.
FWIW. I ran the same heads with 1/2 thick SPD flanges and had no sealing issues. But the flanges are so thin between the two ports that it appeared to have some cross leakage between those two cylinders. I can't say that extra bolts would help.
__________________
PTC Converter Distributor
Twisted 6 Racing
Fastest of the fastest
Freeman, Fiscus, Kereny...who's next
85 Regal w/ turbo SBC
5.05 @ 147 on radials at 3550#
94mm and 325's
Best 1/4 pass
7.77 @ 181