Quote:
|
Originally Posted by chris718
for your targeted performance i would recommend our 10.5 lock up unit.itll allow 3200 to 3400 rpm at 8 to 10psi and be a baby when there is no torque output while cruising at 0 boost.the important thing to remember is that the little v6 has low torque output with no boost and tremendous torque under boost.this being universally accepted conventional converter designs are not applied 100 percent to turbo regal converter selection.the pump,turbine and stator must be carefully "selected and fused "together to achieve good throttle response when low exhaust volume is present to aid in spool up as well as not let the engine overpower the fluid coupling when boost is applied to the converter which will overpower the converter and slice thru the coupling.with our targeted 1/2 ratio change of 5500 rpms you will have 2100 rpms of the engine fat curve to accellerate the car properly as well as arrive at a usable rpm range on the ratio change that is productive to increased accelleration.
|
Thanks Chris! Very well stated based on my experience. the same can be said for the rest of the combination . It all has to work togather, Cam, headers ,turbo,gearing etc. I'll consider your suggestions, Lou