|
Well a 300 shot means he must have a pretty stout motor as well. Thats a good bit of juice. Still if he is running "only" 11's you have pretty much everything you need to give him all he can handle. When you said small stall converter like how small (ie 3000,3400)?
With a good smokey burnout with a set of 28x10's and a good 10lb+ launch with a good enough amount of boost say 25lbs+ or so you should be running very low 11's or better. You have any suspension work done? A set of LCA's and an aftermarket swaybar (ATR, H&R) would help alot.
GL
__________________
Russ
86 GN project rebuilt motor and trans / 206 cam/ GT67 P trim/ Poston headers and crossover/Hooker exhaust/ Halman MBC/EM Alky chip/PTE FMIC/ adj FP/62 Plenum/ RJC plate/ DIY alcohol/THDP/ scanmaster/ 340fp hot wired/ 50lb inj/ still stock D5 converter/Boxed lower CA's/ snubber/ ect 17" Budnik w 315/35/17 DR's. and a shiny new paint job.
Someday might get this thing finished, but I doubt it.
|