There are few good youtube channels on the Holley stuff. Devin Vanderhoof, Sloppy Mechanics, Joe Simpson, etc.Ahh the internet videos
Well seen several terminators
One was on a 4.70 1/8 car
Only reason to pull it off was that more things needed to be seen
It ran great as did the others that are still on various street driven 7/8 cars.
Was a great value.
But the dominator and all the inputs are the choice of many up here.
Ms3pro and many others are up to task of handling most cars.
Seen many hp tuner stuff fly as well.
Computer systems are crazy these days.
Many of them do the same things some are faster and can see more.
We run a separate boost controller co2 and only one real pump (brushless spur).There are few good youtube channels on the Holley stuff. Devin Vanderhoof, Sloppy Mechanics, Joe Simpson, etc.
The biggest downside to all the Holley boxes except the Dominator is I/O; the limit of 4 input and 4 output goes real quick on a boosted setup. You can use a CAN bus module to add more but that is adding cost getting it closer to the Dominator. I had all 4 outputs used up with Fan, 2nd Fuel Pump, and boost solenoids (Boost + and Boost -).
Yes holley teck line sucksThere are few good youtube channels on the Holley stuff. Devin Vanderhoof, Sloppy Mechanics, Joe Simpson, etc.
The biggest downside to all the Holley boxes except the Dominator is I/O; the limit of 4 input and 4 output goes real quick on a boosted setup. You can use a CAN bus module to add more but that is adding cost getting it closer to the Dominator. I had all 4 outputs used up with Fan, 2nd Fuel Pump, and boost solenoids (Boost + and Boost -).
I haven't tried calling but from what I have heard it is a joke.Yes holley teck line sucks
With the Pro Dash you pick up more I/O . 13 inputs and 4 outputs .The biggest downside to all the Holley boxes except the Dominator is I/O; the limit of 4 input and 4 output goes real quick on a boosted setup
I think there are some restrictions on the I/O coming from the dash but I could be wrong. I know the ones on the ecu can react faster than the ones in the dash or can bus module. The Pro Dash is nice too because you can make some tune changes on and actually store tunes on it's storage to upload to the ECU.With the Pro Dash you pick up more I/O . 13 inputs and 4 outputs .