got some pics.
As you can see, there are a couple of "shim spacers" in the mix. I did that to be able to fine tune the engine angle. [Currently at 4*.]
The lower plate 1/4". [The top plate is a spacer, so the large plate will clear the tail hsg at the ft.] I just cut the orig mount tab off, and made a new one. I used the "reversed plate" to get the x member in it's original location. [The engine is moved back as far as I thot practical.. About 1" off the firewall.]
The mount is a Energy Suspension Poly.
If anyone needs more info/pics, let me know..